82
Creating a song (Song Recording)

Correcting the note timing while you record (Input

Quantize)

Quantize is a function that automatically aligns the notes of your pad performance to
accurate timing intervals. Here's how you can apply the Quantize function during
realtime-recording.
In addition to the settings described in step 4 of

Basic procedure for realtime
recording

(p. 78), you'll need to set the following parameter.
• Input Quantize Type
This applies quantization to the data you input (perform).

Selecting the performance data that will be

recorded (Recording Filter)

Normally when you perform realtime recording, all the data you perform will be
recorded. If you don't want certain types of performance data to be recorded, you can
use the Recording Filter.
1.

Perform the

Basic procedure for realtime
recording

(p. 78) through step 3, and access
the

RECORDING PARAMETER (MIDI)
popup

(p. 211).

2.

Press (Rec Filter).

The

RECORDING FILTER popup

(p. 213) will
appear.

3.

Use (up/down) to select a type of performance data (MIDI message).

4.

Press (On/Off).

Apply a check mark (

✔

) to performance data you want to record; remove the check

Range
Off

Quantize will not be applied; your performance will be recorded ex-
actly as you play it.
Grid
The note timing will be aligned to intervals of the beat you specify.
Use this when you want to record drums or bass with accurate tim-
ing.
Shuffle
The timing of backbeats will be adjusted forward or backward, pro-
ducing a “shuffle” or “swing” feel.

fig.10-06.j
For details on other
Quantize-related
parameters, refer to
RECORDING
PARAMETER (MIDI)
popup (p. 211).
You may get undesired results
if you apply Shuffle Quantize
to performance data whose
timing is inaccurate. In such
cases, it's a good idea to first
apply Grid Quantize to align
the timing of the performance
data.
Grid Quantize
Shuffle Quantize with Rate = 75%
75%
100%
50%
For details on each item of
recorded data, refer to the
RECORDING FILTER
popup (p. 213).
You can press [F1 (All On)] to
assign a check mark to all
items, or press [F2 (All Off)] to
remove all check marks.
ECS05_manual_e.book 82 ページ ２００５年１１月３０日　水曜日　午前１１時１４分