298
INSTRUMENTS

LOAD PATCH screen

Here you can load patch data from the disk, and use
it as a patch in the current project.

To access this screen

•

➜➜

(choose Load Patch)

➜
INSTRU-
MENTS

Explanation of each area

1.

Current drive

Shows the currently selected drive with its icon.

2.

Wave Memory

Displays the internal memory usage as a graph. The
black area of the graph is the amount used by wave
data, and the white area is unused. The remaining
space available for importing is shown at the bottom
of the graph.

Approximately 10 MB of the installed memory is
used by the system. This means that even when
wave memory contains no sampling data, the
remaining wave memory display will be
approximately 10 MB less than the installed
amount.

3.

Current folder name

Displays the name of the currently selected folder.
Folder levels below the root (the top level of the
folder structure) are shown by a slash “/” symbol.

4.

Name

Displays the name of the saved patch data.

F-buttons

Select Drive

Displays the

SELECT DRIVE popup

(p. 203), where
you can switch the drive from which to select
patches.

Execute

Loads the patch selected by the cursor, and then
displays the

INSTRUMENTS screen

(p. 265).
ECS05_manual_e.book 298 ページ ２００５年１１月３０日　水曜日　午前１１時１４分