323
SYSTEM
PROJECT SYSTEM DISK/USB MASTERING SAMPLING
4.
Slider Mode / Knob Mode
As you switch screens or perform various operations,
the positions of the top panel sliders and knobs may
no longer match the actual values of the parameters
they are controlling. This setting specifies how the
sliders or knobs will operate in such cases.
5.
Tap Tempo
Specifies the Tap Tempo function of the [BPM/TAP]
button.
6.
Tap Resolution
Specifies the beat interval by which the tempo will be
set when you use the Tap Tempo function.
Value Explanation
Null
The value will not change until the slid-
er/knob position matches the actual
value. In order to control the value, you
must first move the slider/knob to the
actual value.
Jump
When you operate a slider/knob, the
parameter will immediately change to
the corresponding value.
Relative
Moving the slider/knob will increase or
decrease the value relative to the current
value.
Value Explanation
Off The Tap Tempo function will not be
used.
On
The tempo will be set by the interval at
which you press [BPM/TAP].
Value Explanation
(120) Press [BPM/TAP] at quarter notes of
the tempo you want to set.
(240) Press [BPM/TAP] at eighth notes of the
tempo you want to set.
(480)
Press [BPM/TAP] at 16th notes of the
tempo you want to set.
ECS05_manual_e.book 323 ページ ２００５年１１月３０日　水曜日　午前１１時１４分