Roland MV-8000 , Erasing unwanted data while you record (Event Erase), Correcting the timing (Edit Quantize),

83
Creating a song (Song Recording)
Creating a song (Song Recording) Editing a song Playing your songs Using effects Adjusting the balance of your song and
mastering it
mark from performance data you don't want to record.
5.
Press (Close).
The RECORDING FILTER popup will close.
Erasing unwanted data while you record (Event
Erase)
Event Erase is a function that lets you erase unwanted data during realtime recording.
This is particularly convenient during loop-recording, since you can erase data
without stopping recording.
1.
Begin realtime recording as described in Basic procedure for realtime
recording (p. 78).
2.
Hold down .
The EVENT ERASE popup (p. 253) will appear.
3.
Continue holding down , and press
the for the event (note number) you
want to erase.
While you listen to the recorded performance, press the pad at the appropriate timing.
The data for that pad will be erased while you continue holding down the pad. You
can press more than one pad if desired, and the data for those pads will be erased.
How events are erased when you hold down more than one pad will depend on the Mode
setting of the EVENT ERASE popup.
4.
Release .
The EVENT ERASE popup will close, and you will return to normal recording.
Correcting the timing (Edit Quantize)
Edit Quantize is a function that lets you align the timing of data that has already been
input.
1.
Press .
The SEQUENCE screen will appear.
2.
Press (Seq Edit).
The SEQUENCE EDIT screen will appear.
Setting Operation
Direct
Only the events of the pads you hold down will be erased.
Range Events will be erased for all pads between (and including) the pads
you hold down.
Realtime Erase can be executed
only if the recording mode is
set to “Overdub.”
ECS05_manual_e.book 83 ページ ２００５年１１月３０日 水曜日 午前１１時１４分