Roland MV-8000 Storing the current effect settings in the , library

123
Using effects
Using effectsEditing a songCreating a song (Song Recording) Playing your songs Adjusting the balance of your song and
mastering it
Storing the current effect settings in the
library
After you've edited the effect parameters to create your own effect settings, you can
store them in the library and recall them later when needed.
1. Edit the effect parameters as described in Editing the effect parameters (p.
122).
2.
Press , move the cursor to Library, and press .
The EFFECT LIBRARY popup (MFX/DlyCho/Reverb) (p. 374) will appear. The screen
that appears will depend on the current effect.
3.
Turn the VALUE dial or use / to select the user area number in
which you want to store your settings.
The user area is the section of memory in which you can store your own settings. The
user area consists of the effect library numbers preceded by a “U” character.
4.
Press (Write Here).
The current effect settings will be written into the effect library number you selected.
Current
effect
Item displayed
by [MENU]
Screen that appears
MFX MFX Library MFX LIBRARY screen (p. 374)
Dly/Cho Dly/Cho Library DELAY/CHORUS LIBRARY screen (p. 374)
Reverb Reverb Library REVERB LIBRARY screen (p. 374)
For details on the number and
structure of the effect library,
refer to Libraries (p. 28).
You can't save settings in the
preset area (effect library
numbers preceded by a “P”).
Once you overwrite a
library number, there's no
way to recover its previous
contents. You may want to
save the user library to disk
b
efore you overwrite your
own settings.
ECS05_manual_e.book 123 ページ ２００５年１１月３０日 水曜日 午前１１時１４分