Roland MV-8000 CREATE NEW PROJECT screen

314
PROJECT
CREATE NEW PROJECT screen
Here you can create a new project.
To access this screen
• ➜ (move the cursor to the lower row of
icons) ➜
Explanation of each area
1. Project Name
This is the name of the project. When you access this
screen, a provisional name of “InitProj ###” will be
assigned (### is a number).
2. Copy From Current Project
When you create a project, the various parameters
and samples of the current project will be applied to
the new project.
Add a check mark ✔ to the parameters that you want
to use in your new project. You can copy the
following parameters.
If you add ✔ marks to Instrument, Audio Phrases,
and Patch Library, the samples used by this data
will also be copied.
F-buttons
Name
Displays the EDIT NAME popup (p. 199), where you
can assign a name to the new project you are creating.
Execute
Creates the project.
If the display asks “Save Current?”
Your changes will be lost unless you save the current
project before creating the new project.
If you don't save the current project at the “Save
Current?” prompt, there is no way for you to
recover that data (unless you have previously made
a backup of it). Roland accepts no responsibility for
the recovery of lost data, nor for any damages that
may result from such loss.
Option Explanation
Instruments of
current song
Instruments and samples of
current song
Effects of current
song
Effect settings of current
song
Audio Phrases Audio phrases
Patch Library Patch library
MFX Library MFX library
Delay/Chorus
Library Delay/chorus effect library
Reverb Library Reverb effect library
Mastering Toolkit
Library Mastering Tool Kit library
MIDI Clip Library MIDI clip library
F-button Explanation
No To discard your changes and create
the new project.
Yes To save before creating the new
project.
Cancels the creating the new project
operation.
ECS05_manual_e.book 314 ページ ２００５年１１月３０日 水曜日 午前１１時１４分