Roland MV-8000 Using the MV-8000 with MIDI or V-LINK devices

160
Using the MV-8000 with MIDI or
V-LINK devices
The MV-8000 has one MIDI IN connector and two MIDI OUT connectors.
You can connect a MIDI controller (MIDI keyboard, MIDI guitar, MIDI percussion
pads, etc.) to MIDI IN and record your performance on the MV-8000 (e.g., sequence
recording). You can connect sound modules to the two MIDI OUT connectors, and
control sixteen MIDI channels from each connector (for a total of 32 MIDI channels).
V-LINK mode lets you control a V-LINK device connected to MIDI OUT, allowing you
to “perform video” that is linked with your music.
Using MIDI devices
Recording your playing from a MIDI keyboard
Here's how your playing on a MIDI keyboard connected to the MIDI IN connector can
be input to the MV-8000 and recorded on the sequencer.
1. Connect your MIDI keyboard to the MV-8000's MIDI IN connector as
described in Quick Start “Preparing your equipment and making connections”
(p. 4).
2.
Begin sequence recording as described in Basic procedure for realtime
recording (p. 78).
Your keyboard performance will be recorded on the sequencer.
Playing a connected external sound module
Performance data recorded on the MV-8000's sequencer can be sent to a MIDI sound
module etc. connected to the MIDI OUT connector.
1.
Connect the MV-8000's MIDI OUT connector to your MIDI sound module as
described in Quick Start “Preparing your equipment and making connections”
(p. 4).
2.
Press .
SEQUENCE screen (p. 205) will appear.
3.
Use (up/down) to select the MIDI
track on which the performance data you want
to transmit has been recorded.
The selected track will be the current track.
By connecting the R-BUS
connector provided by the
MV8-OP1 (sold separately) to
the DIF-AT24 (sold
separately), you can add an
additional sixteen channels of
MIDI OUT.