161
Using the MV-8000 with MIDI or V-LINK devices

Using the MV-8000 with MIDI or V-LINK
devices
Creating an audio CD Using the MV8-OP1 (Audio I/O
Expansion) to connect external devices
Project and disk management Using data of other formats

4.

Press (Track Param).

The

TRACK PARAMETER (MIDI) popup

(p.
208) will appear.

5.

Set the MIDI parameter.

Select the MIDI connector and channel on
which you want to transmit the performance
data.

Using the sliders to control an external MIDI sound

module (Assignable Sliders)

You can use the MV-8000's sliders to send control change messages to a connected
external device.

1.

Press .

[ASSIGNABLE SLIDER] will light orange, indicating that sliders 1~8 are in Assignable
Slider mode.

2.

Move sliders 1~8 to transmit control change messages. The control change

messages will be transmitted from MIDI OUT. Each slider transmits the

following control change message.

Changing the control change messages that are

transmitted

Here's how you can assign different control change messages to the sliders.

1.

Press .

The

SYSTEM MENU screen

(p. 319) will appear.

2.

With the cursor located in the lower row of

icons, press (Slider). Alternatively, you

can select the SLIDER icon and press

.

Value Output destination Channel

A1
MIDI OUT A
1
: :
A16 16
B1
MIDI OUT B
1
: :
B16 16
R1
R-BUS (use MV8-OP1 and DIF-AT24)
1
: :
R16 16

Slider Control change
Number Message

17 Volume
2 10 Pan
3 91 Reverb Send level
4 93 Chorus Send Level
5 74 Cutoff Frequency
6 71 Resonance
7 73 Attack Time
8 72 Release Time
In order to output MIDI to
R-BUS, you will need the
MV8-OP1 (sold separately)
and DIF-AT24 (sold
separately). Please also refer to
the manuals of the MV8-OP1
and DIF-AT24.
When [ASSIGNABLE SLIDER]
is lit orange, the sliders will
transmit the assigned control
change messages regardless of
the screen in which you are.
ECS05_manual_e.book 161 ページ 2005年11月30日 水曜日 午前11時14分