38

Sampling

The most basic way to produce music on the MV-8000 is to arrange wave data on one
or more tracks. You can either import an existing WAV file, or record (sample) a new
one.

Recording audio

Here's how to record (sample) from a connected external mic or synthesizer, and use
the sample as an audio source for the MV-8000's sampler.

Making initial settings for sampling

To select the source (input jack) for sampling
1.
Press .
The
SYSTEM MENU screen
(p. 319) will appear.
2.
With the cursor placed in the upper row of
icons
Press (Global), or select the GLOBAL icon and
press .
The
GLOBAL screen
(p. 320) will appear.
3.
Use the Input Select parameter to select the
audio source you want to record.
To adjust the sensitivity and level of the analog input
1.
Press .
The
MIXER (AUDIO TRACK) screen
(p. 378) will appear.
2.
Press (AUX/Phrs/In).
The AUX bus, effect, audio phrase, and input mixer
will appear.
3.
Set the IN slider to 100.
4.
Input an audio signal to the input jack.
The level meter will move.
5.
Adjust the knobs.
Adjust the knobs so that the level meters move as high
as possible in the range of -12 dB~0 dB. If the clip
indicators light, the level is too high.

Using a sampled sound as an audio phrase or patch

1.
Before you continue, select the audio source you want to sample and adjust
the recording level.
Making initial settings for sampling
(p. 38)
The explanations in this
manual include illustrations
that depict what should
typically be shown by the
display. Note, however, that
your unit may incorporate a
newer, enhanced version of the
system (e.g., includes newer
sounds), so what you actually
see in the display may not
always match what appears in
the manual.
If the MV8-OP1 (sold
separately) is not installed, this
will be fixed at Analog.
If you're recording an analog
input source, adjust the
recording level before
sampling. If you're using
digital input, there's no need to
adjust the level since the input
audio will be recorded at its
original level.
-12~0 dB
Clip
indicators