13

Panel Descriptions

fig.buttons

[TRANSPOSE]

Sets the range of the keyboard to transposed (p. 42).

6. DISPLAY

This shows the Tone names and the values of various settings, etc.

[SHIFT/EXIT]

Pressed to return to a previous screen or to cancel a procedure that is
in progress.
Additionally, you can easily call up Edit screens for related
parameters for the following functions by holding down this button
while pressing buttons, turning knobs, or operating other controllers
(p. 155).

[F1/TONE INFO]

This allows you to change the tone settings (p. 70).
You can also use this to assign functions in some screens.

[F2/ZONE INFO]

This allows you to change the zone settings (p. 68).
You can also use this to assign functions in some screens.

[ENTER]

This is used to finalize a value or execute an operation.

7. CONTRAST knob

Adjusts the display’s contrast (p. 26).

8. CURSOR [ ], [ ], [ ], [ ]

Press these to switch pages and to move the cursor.

9. [DEC], [INC]

This is used to modify values.
If you keep on holding down one button while pressing the other,
the value change accelerates.

10.ONE TOUCH
[PIANO]

Selects the optimum settings for piano performances (p. 32).

[E.PIANO]

Selects the optimum settings for E.piano performances (p. 32).

[SETUP]

Calls up the stored settings (Setup) (p. 56).

11.ZONE SELECT buttons

Selects the zone for which the tone is to be selected (p. 40).

12.EXPANSION [A], [B]

This selects a sound from a wave expansion board, sold separately
(p. 35).

13.FUNCTION
[EDIT]

Press this button when you wish to adjust various settings (p. 78).

[WRITE]

Stores the current settings to “Setup” (p. 58).

[NUM LOCK]

You can input numerical values with the TONE SELECT buttons
when this button is lit (p. 34).
In addition, you can listen to the demo songs by simultaneously
pressing this button and [EDIT] (DEMO PLAY) (p. 31).

14.TONE SELECT buttons

Pressed to select tones (p. 33).
You can also input numerical values with these buttons when the
[NUM LOCK] button is on. [NUM LOCK] turns on automatically in
the Edit and other screens, enabling input of numerical values with
the buttons.

fig.Bender

Pitch Bend/Modulation Lever

This allows you to control pitch bend or apply vibrato (p. 44).
679810 11 12 1314
RD-700SX_e.book 13ページ ２００６年３月２３日　木曜日　午後２時５２分