Roland RD-700SX , Settings Not Saved in a Setup, Setup <000> (PIANO SETUP)

59
Using the Convenient Functions in Performances
7
When you have finished determining the save destination and the
name for the new Setup, press [ENTER] or [F1].
The [ENTER] indicator is flashing, and the confirmation message appears.
fig.Q2-23g
If you do not want to save the Setup, press [EXIT] or [WRITE].
The operation is cancelled, and you are returned to the Tone screen.
8
When [ENTER] is pressed, saving of the Setup begins.
When you have finished saving the Setup, the [WRITE] indicator goes out and
you are returned to the Tone screen.
Never switch off the power
while “Writing...” appears in
the display. Doing so may
damage the internal
memory, making it
impossible to use this
instrument.
Settings Not Saved in a Setup
The following settings cannot be saved to a Setup.
• Song Number
• ONE TOUCH [PIANO] and [E.PIANO] Settings (p. 73)
• System Settings (p. 79)
• Sound Control Settings (p. 88)
• V-Link Settings (p. 97)
• Rec Setting (p. 101)
Pressing [F1 (WRITE)] in the Edit screen saves the System, Sound Control, and V-
Link settings.
Setup <000> (PIANO SETUP)
When you press the ONE TOUCH [PIANO] or [E.PIANO], and then press CURSOR
[ ] to bring up the Setup screen, SETUP<000> is displayed.
fig.Q2-24g
This SETUP<000> is the Setup containing the stored settings for ONE TOUCH
[PIANO] or [E.PIANO]; the contents cannot be overwritten by pressing the [WRITE]
as with other Setups.
When saving content changed from the ONE TOUCH [PIANO] or [E.PIANO]
settings, write the settings to SETUP<001> or later.
RD-700SX_e.book 59ページ ２００６年３月２３日 木曜日 午後２時５２分