34
Performing with the Keyboard
Each individual tone has a different tone number.
You can select tones with the TONE SELECT buttons by inputting numerals with
these buttons to specify tone numbers.
Turn [NUM LOCK] on when inputting numerals with the TONE SELECT buttons.
fig.Q1-07p
1
Press ONE TOUCH [PIANO] or [E.PIANO].
This selects a single tone to be played over the entire keyboard.
2

Press [NUM LOCK] to make the indicator light.

This enables input of numerals with the TONE SELECT buttons.
The numerical value that can be entered with each button is indicated beneath the
buttons.
3

Enter the tone number with the TONE SELECT buttons.

4

Press [ENTER].

The tone is set.
Play the keyboard, and you will hear the selected tone.
The TONE SELECT buttons included in the selected Tone numbers lit.
Specifying the Tone Number to Select a Tone ([NUM LOCK])
“Tone List” (p. 146)
432
1
If multiple tones are playing,
do not press the ONE TOUCH
[PIANO] button, but instead
select the zone containing the
tone to be changed using the
ZONE SELECT buttons. Refer
to “Changing the Tone for a
Zone” (p. 40).

Playing a Rhythm Set

Among the tones that can be selected with the TONE SELECT buttons are Rhythm
Sets, which are collections of a variety of percussion instrument sounds and special
sound effects. Here’s how to select a Rhythm Set and play percussion sounds.
1. Press ONE TOUCH [PIANO] or [E.PIANO].
2. Press TONE SELECT [RHY/GM2].
If [NUM LOCK] is turned on at this time, the Rhythm Set Category cannot be
selected. Turn [NUM LOCK] off.
3. Press different keys to play different percussion instruments.
4. To select a different Rhythm Set, press [INC]/[DEC].
The combination of sounds assigned to the keyboard varies according to the
Rhythm set. Refer to “Rhythm Set List” (p. 149).
Tones selected with [RHY/
GM2] are registered in the
following order: “Rhythm
Sets,” “GM2 Rhythm Sets,”
and “GM2 Tones.” Refer to the
“Rhythm Set List” (p. 149).
RD-700SX_e.book 34ページ 2006年3月23日 木曜日 午後2時52分