94
Detailed Settings for Each Function ([EDIT])
Changing the Drum Set (Rhythm Set)
You can change a rhythm’s drum set (set of drum and percussion
tones).
You can select Tones other than Rhythm Sets.
When this setting is changed, the Part 10 Tone also changes.
In addition, Rhythm Set Change is set to OFF.
Depending on the Rhythm Set that is selected, the Rhythm Set
may not play back properly.
Changing the Pattern Without Changing the Drum Set (Rhythm Set Change)
Each Rhythm in a rhythm pattern has the most suitable drum set
assigned to it. When rhythm patterns are changed, the drum sets
also switch, so the tone is changed, but here the drum set stays
constant and does not change.
Changing the Accent Strength (Rhythm Accent)
Modifies the strength of accents and the length of the notes to adjust
the “groove” feel of the arpeggio. A setting of 100% will produce the
most pronounced groove feel.
Changing the Beat Syncopation (Rhythm/Arpeggio Grid)
This sets the minimum value of the notes comprising rhythms and
arpeggios and adjusts the amount of swing (None/Weak/Strong).
This setting is shared by the Arpeggiator settings.
Making the Sound More Staccato or Legato (Rhythm/Arpeggio Duration)
This sets the duration of the sound. You can make it more staccato
(short and clipped), or legato, so notes are played longer.
This setting is shared by the Arpeggiator settings.
Selecting the MIDI Output Connector (Rhythm MIDI Out Port)
This sets the MIDI connector (port) from which the rhythm part is to
be output.
Changing this setting also changes the song’s MIDI output
settings.
Selecting the MIDI Output Channel (Rhythm MIDI Out Channel)
This sets the channel used for outputting rhythm parts as MIDI
output.
Parameter Value
Rhy Set Refer to
“Rhythm Set List”
(p.
149).
Parameter Value Description
Rhy Set Change ON When the Rhythm is changed, the
drum set also changes.
OFF When the Rhythm is changed, the
drum set does not change.
Parameter Value
Rhy Accent 0–100%
Parameter Value Description
Rhy/Arp
Grid
1/4: Quarter note
(one grid section = one beat)
1/8: Eighth note
(two grid sections = one beat)
1/8L: Eighth note shuffle Light
(two grid sections = one beat, with a
light shuffle)
Rhy/Arp
Grid
1/8H: Eighth note shuffle Heavy
(two grid sections = one beat, with a
heavy shuffle)
1/12: Eighth note triplet
(three grid sections = one beat)
1/16: Sixteenth note
(four grid sections = one beat)
1/16L: Sixteenth note shuffle Light
(four grid sections = one beat, with a
light shuffle)
1/16H: Sixteenth note shuffle Heavy
(four grid sections = one beat, with a
heavy shuffle)
1/24: Sixteenth note triplet
(six grid sections = one beat)
Parameter Value Description
Rhy/Arp
Duration
30, 40, 50, 60,
70, 80, 90,
100, 120 (%)
For example, when set to “30,” the
length of the note in a grid (or
when a series of grids is connected
with ties, the final grid) is 30% of
the full length of the note set in the
grid type.
Full Even if the linked grid is not
connected with a tie, the same note
continues to sound until the point
at which the next new sound is
specified.
Parameter Value
MIDI Out Port ALL, INT (INTERNAL),
1 (MIDI OUT 1),
2 (MIDI OUT 2), USB
Parameter Value
MIDI Out Channel OFF, 1–16
Parameter Value Description
RD-700SX_e.book 94ページ 2006年3月23�� 木曜日 午後2時52分