41
Performing with the Keyboard
fig.Q1-21pe
With the RD-700SX, each of the parts that is performed using the internal sound
generator is referred to as an INTERNAL Zone.
You can use the ZONE SWITCH buttons and ZONE LEVEL sliders (UPPER 1,
UPPER 2, LOWER 1, LOWER 2) to turn sounds on and off and set their volume level.

ZONE SWITCH

This determines whether or not the sounds in the particular zone are played.
When a zone’s ZONE SWITCH indicator is lit (on), the zone sounds when the
keyboard is played. The screen Zone names are indicated in uppercase letters.
When a zone’s ZONE SWITCH indicator is not lighted (off), the zone does not sound
even when the keyboard is played. The screen Zone names are not indicated (Only
UPPER1 appears in lowercase.).
ZONE SWITCH will turn on or off each time you press it.

ZONE LEVEL Slider

Adjusts the volume of an individual zone.
When a zone’s ZONE SWITCH indicator is not lighted, no sound is produced for the
zone even when the slider is moved.
Adjust the Volume Level for Individual Zones (ZONE SWITCH/ZONE LEVEL Slider)
ZONE LEVEL Slider
ZONE SWITCH
Use the VOLUME slider when
adjusting the overall volume
level (p. 24).
You cannot adjust the volume
level with the ZONE LEVEL
sliders when [CONTROL/
ZONE LEVEL] is lit.
Zones to which tones from external sound modules are assigned are called
EXTERNAL Zones. With the RD-700SX, you can control both the External and
INTERNAL Zones in the same manner. For more on the control of EXTERNAL
Zone, refer to “Adjusting the Volume of Each Zone (EXTERNAL Zone)” (p. 64).
RD-700SX_e.book 41ページ ２００６年３月２３日　木曜日　午後２時５２分