76
Making Detailed Settings for the ONE TOUCH Tones

You can make changes in tones by adjusting the settings of the
elements.

Decay Time Offset:

The time it is to take following the attack for the volume to decrease.

Cutoff Offset:

Adjusts how much the filter is opened.

Release Time Offset:

The time it takes after the key is released for a sound to become
inaudible.

With certain tones, the effect may be difficult to distinguish.
This restores the One Touch E. Piano settings to their initial
conditions.

1.

In Step 3 of the Piano Edit settings instructions
(p. 73), select “5. Initialize” and press [ENTER].

To cancel the Initialize, press [EXIT].

2.

Press [ENTER].

The confirmation message appears.

3.

Press [ENTER] once again.

The ONE TOUCH [PIANO] tones are initialized.
You can make more detailed settings to fashion just the Tones you
want using the E.piano Tone selected by pressing ONE TOUCH
[E.PIANO] (p. 32).
This function is called “E.Piano Edit.”
The settings made in E.Piano Edit are stored to ONE TOUCH
[E.PIANO].

When ONE TOUCH [E.PIANO] is pressed, all settings other
than the E.Piano Edit settings are switched to their status at the
time the RD-700SX’s power was turned on. Store any
arrangements of settings that you want to keep in Setup (p. 58).

1.

Press [F1] in the ONE TOUCH [E.PIANO] screen to
select the type you want to set.

2.

Press [F2].

fig.04-g07-1

3.

Press CURSOR [ ]/[ ] to switch screens, and
press CURSOR [ ]/[ ] to move the cursor to
the parameter to be set.

4.

Press [INC]/[DEC] to set the value.

5.

If you want to save the setting, press [F1 (WRITE)].

The confirmation message appears. Press [F1 (WRITE)] to save
the settings. If you want to cancel, press [EXIT].

6.

When you finish making settings, press [EXIT].

You are returned to the ONE TOUCH [E.PIANO] screen.

Changing Sound Characteristics

(Tone Modify)

Parameter Value Description

Decay Time
(Offset)
-64–+63 The time it takes for the volume to
fall increases as the value is raised;
lowering the value decreases the
decay.
Cutoff
(Offset)
Higher values brighten the sound;
lower values make the sound seem
darker.
Release
Time
(Offset)
Higher values produce longer decay;
set lower values for a clear-cut
sound.

Restore the settings to initial

conditions (Initialize)

Making Detailed Settings for the E.Piano Tones (E.Piano Edit)

Making the settings

RD-700SX_e.book 76ページ ２００６年３月２３日　木曜日　午後２時５２分