Roland RD-700SX , Assigning Functions to Pedals (FC1/FC2 Pedal Assign), , Changing the MULTI EFFECTS [CONTROL] Knob Settings (Control Knob Assign), , Changing the Slider Settings (Slider Assign)

85
Detailed Settings for Each Function ([EDIT])
This setting determines the function of the pedal switches or
expression pedals (such as the optional EV series) that are connected
to the FC1 and FC2 jacks on the rear panel.
Normally, MULTI EFECTS [CONTROL] knob is used for making
settings that adjust the multi-effects (MFX1 Control), but they can
also be used for settings that change the way tones are played or the
tempo.
This sets the function of the slider when [CONTROL/ZONE LEVEL]
is set to “CONTROL” (lit).
Assigning Functions to Pedals
(FC1/FC2 Pedal Assign)
Parameter Value Function/Parameter Setting
Changed
FC1/FC2
(Pedal
Assign)
OFF No control
CC01–CC31,
CC33–CC95
Controller Numbers 1–31,
33–95
96:
BEND-UP
Raises the pitch (up to a
maximum of four octaves).
97:
BEND-DWN
Lowers the pitch (up to a
maximum of four octaves).
98:
AFTER TOUCH
After Touch
99:
OCT-UP
Each pedal press raises the key
range in octave steps (up to 4
octaves higher).
100:
OCT-DOWN
Each pedal press lowers the
key range in octave steps (up to
4 octaves lower).
101:
START/STOP
Starts/Stops the external
sequencer.
102:
TAP-TEMPO
The tempo will be modified to
the interval at which you press
the pedal.
103:
RHY PLY/STP
Starts and stops Rhythms (p.
48).
104:
ARPEGGIO SW
Performs the same function as
[ARPEGGIO]. Switches the
Arpeggio (p. 46) on and off.
105:
MFX ON/OFF
Performs the same function as
MULTI EFFECTS [ON/OFF].
Switches the multi-effects (p.
52) on and off.
106:
MFX CONTROL
Adjusts the amount of multi-
effects (p. 52).
107:
SNG PLY/STP
Starts/Stops the song (p. 50).
Changing the MULTI EFFECTS
[CONTROL] Knob Settings
(Control Knob Assign)
Parameter Value Description
Ctrl Knob
(Control
Knob
Assign)
OFF No control
MFX1
CTRL
MULTI EFECTS [CONTROL] knob
adjusts the MFX Control of MFX1
applied.
MFX2
CTRL
MULTI EFECTS [CONTROL] knob
adjusts the MFX Control of MFX2
applied.
MFX1
&2 CTRL
MULTI EFECTS [CONTROL] knob
adjusts the MFX Control of MFX1 and
MFX2 applied.
TEMPO MULTI EFECTS [CONTROL] knob
changes the tempo.
Changing the Slider Settings
(Slider Assign)
Parameter Value Description
Slider Assign
(UP1/UP2/
LW1/LW2)
OFF No control
CC01–CC31,
CC33–CC95
Controller Numbers 1-31, 33-
95
96:
BEND-UP
Raises the pitch in semitone
units (up to a maximum of
four octaves).
97:
BEND-DOWN
Lowers the pitch in semitone
units (up to a maximum of
four octaves).
98:
AFTER TOUCH
After Touch
RD-700SX_e.book 85ページ ２００６年３月２３日 木曜日 午後２時５２分