Roland RD-700SX , , , Adjusting the Level of the Sounds Low, Mid, and High-Frequency Ranges ([EQUALIZER])

45
Performing with the Keyboard
The RD-700SX is equipped with a three-band equalizer.
You can adjust the levels of the low-frequency, midrange, and high-frequency
ranges using the EQUALIZER [LOW], [MID], and [HIGH] knobs, respectively.
You can also adjust the midrange frequency with [MID FREQ].
fig.Q1-28eq
1
Press EQUALIZER [ON/OFF] to make its indicator light.
A screen like the one shown below appears, and the equalizer is turned on.
fig.Q1-29g
2
Turn the knobs to adjust the levels in each range.
Rotating a knob ([LOW], [MID LEVEL], [HIGH]) in the negative direction cuts the
level of that frequency range; rotate it in the positive direction boost the level of that
range.
In addition, rotating [MID FREQ] in the negative direction lowers the frequency,
while rotating it in the positive direction raises the frequency.
You can press [F2] to get a numerical reading for the value of the setting. Pressing
[F2] toggles you between “NUMERIC” and “GRAPHIC” as the format for what you
see indicated in the screen.
fig.Q1-30g
The way settings are made differs depending on the format used, as follows:
When the Graphic format is used
• Slightly adjust the knob for the range in which you want to change the value to
move the cursor.
• Press CURSOR [ ]/[ ] to adjust the frequency.
• Press CURSOR [ ]/[ ] to adjust the Q.
When the Numeric format is used
• Press CURSOR [ ]/[ ]/[ ]/[ ] to move the cursor.
• Press [INC]/[DEC] to change the value.
3
To turn the equalizer off, press EQUALIZER [ON/OFF], extinguishing
its indicator.
Adjusting the Level of the Sound’s Low, Mid, and
High-Frequency Ranges ([EQUALIZER])
Equalization is applied to the
overall sound output from the
OUTPUT jacks.
You can set the RD-700SX so
that the equalizer settings are
not changed when you change
setups. Refer to “Preventing
Equalizer Settings from
Being Switched (EQ Mode)”
(p. 80).
GRAPHIC NUMERIC
Sounds may be distorted with
certain knob settings. If this
occurs, adjust the Input Gain
on the upper of the
“NUMERIC‘ screen.
RD-700SX_e.book 45ページ ２００６年３月２３日 木曜日 午後２時５２分