Roland RD-700SX , Rear Panel

14

Panel Descriptions

fig.rear

1. [POWER ON] Switch

Switch turns the power on/off (p. 23).

2. AC Inlet

Connect the included power cord to this inlet (p. 21).

3. Wave Expansion Board Installation Slot

Remove the cover for installation of optional wave expansion boards

(SRX Series) (p. 15).

4. USB Connector

Connect your computer here to exchange Standard MIDI file and

setup file between the computer and the RD-700SX (p. 104).

5. PEDAL Jacks (DAMPER, FC1, FC2)

Connecting the pedal switch (DP series) provided with the RD-

700SX to the DAMPER jack allows you to use the switch as a damper

pedal.

With a pedal connected to the FC-1 or FC-2 jack, you can then assign

a variety of functions to the pedal (p. 70, p. 84).

6. MIDI Connectors (IN, OUT1, OUT2, THRU)

Used for connecting external MIDI devices and for transmission of

MIDI messages (p. 60, p. 91, p. 101).

7. OUTPUT L (MONO)/R Jacks

Provide output of the audio signals. These are connected to an amp

or other device. For monaural output use the L/MONO jack (p. 21).

8. BALANCED OUT L/R Jacks

Connectors for balanced output of the audio signals. Connect to

mixers and other such gear (p. 21).

9. PHONES Jack

A set of headphones can be connected to this jack (p. 21).

Even when headphones are connected, sound will still be output

from the OUTPUT jacks.

Rear Panel

1

2

34 5 67 8 9

RD-700SX_e.book 14ページ２００６年３月２３日　木曜日　午後２時５２分

Contents

Main Thank you, and congratulations on your choice of the Roland Digital Piano RD-700SX. MIDDLE EAST NORTH AMERICA Owners Manual Information EGYPT REUNION IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS DECLARATION OF CONFORMITY Compliance Information Statement NOTICE AVIS FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT Page IMPORTANT NOTES Handling CD-ROMs Additional Precautions Repairs and Data Main Features Contents Overview of the RD-700SX...................................................................28 Using the Convenient Functions in Performances............................46 Making Detailed Settings for Tones....................................................68 Using the RD-700SX As a Master Keyboard.......................................60 Making Detailed Settings for the ONE TOUCH Tones.......................73 Detailed Settings for Each Function ([EDIT]) .....................................78 Connecting External MIDI Devices....................................................101 Connecting to Your Computer via USB (USB Mode).......................104 Panel Descriptions Front Panel Panel Descriptions 67 9 810 11 12 13 14 Panel Descriptions Rear Panel 34 5 67 8 9 1 2 Getting Ready Installing the Wave Expansion Board Cautions When Installing an Wave Expansion Board Installing SRX Series Boards push Checking the Installed Wave Expansion Boards Installation de la carte dextension Wave(French language for Canadian Safety Standard) Precautions lors de linstallation de la carte dextension Wave Installer les cartes de serie SRX push Verification des cartes dextension audio apres installation Connecting the RD-700SX to External Equipment Connect the RD-700SX and the external device. Before you begin making connections, confirm the following. Connecting Pedals About the Output Jacks Turning On the Power Adjust the RD-700SXs volume to obtain the proper volume level. Adjust the volume of the connected external device. Press the upper portion of the [POWER ON] switch on the back of the RD-700SX to turn on the power. The unit is powered up, and the displays backlighting comes on. Turning the Power On and Off Page Press [ENTER] to display the Utility screen. 12,43,5,6,7 Press CURSOR [ ] to select 9.Utility. Press [EDIT], getting the indicator to light. Press CURSOR [ ] to select Factory Reset All. Restoring the Factory Settings (Factory Reset) Notes Page Page Overview of the RD-700SX Main Screens Basic Operation Units of Sound The Tone Screen (Basic Screen) About the Function Buttons EXTERNAL Screen The Rhythm/Song/Arpeggio Screen The Setup Screen Page Listening to the Demo (DEMO PLAY) Press CURSOR [EXIT] or [F1(MENU)] to stop a song during playback. Hold down [NUM LOCK] and press [EDIT]. Performing with the Keyboard You can now press [F1] to switch the type. Press [INC]/[DEC] to select the tone. Press any of the TONE SELECT buttons to select the tone category. Performing with a Variety of Tones Specifying the Tone Number to Select a Tone ([NUM LOCK]) Playing a Rhythm Set Press [NUM LOCK] to turn on the button indicator. Press EXPANSION [A] or [B] to make its indicator light. Selecting Wave Expansion Board Tones Wave Expansion Board Tone Name Correspondence Table Selecting Tones Without Pressing [NUM LOCK] 3. Play the keyboard, and you will hear the selected tone. Press [UPPER2] once more, and the indicator light goes out. Press PART SWITCH [UPPER1] and [UPPER2], getting the indicators to light. Playing Multiple Tones with the Keyboard Performing with Layered Tones Playing Different Tones in Two Different Sections of the Keyboard ([SPLIT]) Pressing Two TONE SELECT buttons Simultaneously Hold down [SPLIT] and press a key. Hold down [SPLIT] for several seconds. Changing the Keyboards Split Point Select the tone category with a TONE SELECT button, then press [INC]/[DEC] to select the tone. Changing the Tone for a Zone ZONE LEVEL Slider ZONE SWITCH Adjust the Volume Level for Individual Zones (ZONE SWITCH/ZONE LEVEL Slider) Hold down [TRANSPOSE] and press a key. Hold down [TRANSPOSE] for several seconds. To turn off Transpose, press [TRANSPOSE] so that its indicator goes off. Transposing the Key of the Keyboard ([TRANSPOSE]) 1,2,3 Adding Breadth to the Sound ([CHORUS/DELAY]) Press the [CHORUS/DELAY]. Press the [REVERB]. Adjust the REVERB [DEPTH] knob to select the amount of reverb effect to be applied. Adding Reverberation to the Sound ([REVERB]) Adding Liveliness to the Sound ([SOUND CONTROL]) Press the [SOUND CONTROL] button, getting its indicator to light. Adjust the CHORUS/DELAY [DEPTH] knob to select the amount of chorus effect to be applied. To cancel this function, press the [SOUND CONTROL] once more, extinguishing the indicator. Changing the Sounds Pitch in Real Time (Bender/ Modulation Lever) Pitch Bend Modulation When the Numeric format is used When the Graphic format is used Turn the knobs to adjust the levels in each range. Press EQUALIZER [ON/OFF] to make its indicator light. To turn the equalizer off, press EQUALIZER [ON/OFF], extinguishing its indicator. Adjusting the Level of the Sounds Low, Mid, and High-Frequency Ranges ([EQUALIZER]) GRAPHIC NUMERIC Using the Convenient Functions in Performances Press a key below Middle C (C4). Press [ARPEGGIO], getting the indicator to light. Page Press [RHYTHM/SONG] to make the button indicator light. Press [RHYTHM/SONG] once more; the indicator goes out, and the Rhythm stops playing. Playing Rhythm ([RHYTHM/SONG]) Rhythm/Song/Arpeggio screen Page Press [RHYTHM/SONG] to make the button indicator light. Press [RHYTHM/SONG] once more; the indicator goes out, and the song stops playing. Playing the Songs ([RHYTHM/SONG]) Rhythm/Song/Arpeggio screen Page Press MULTI-EFFECTS [ON/OFF], getting its indicator to light. Adjust the amount of multi-effect applied with the MULTI-EFFECTS [CONTROL] knob. To cancel the multi-effect, press MULTI-EFFECTS [ON/OFF], the indicator light goes out. Applying Effects to the Sound (Multi-Effects) 1,2,3 Simulating the Creation of Organ Tones (Tone Wheel Mode) What Are Feet? 35 41 2,5 Changing the Undulation of the Organ Tone (Rotary Effect) Changing the ZONE LEVEL Slider Feet Assignments (Harmonic Bar) Page Try playing the keyboard. Press one of the TONE SELECT buttons to select a Setup. Press [F2 (BANK CHANGE)] to select a bank. Selecting Stored Settings ([SETUP]) 2 1 3 Registering the Setups You Like (Favorite Setups) Selecting Setups Other Than the Favorite Setups Page When [ENTER] is pressed, saving of the Setup begins. Settings Not Saved in a Setup Using the RD-700SX As a Master Keyboard Whats MIDI? About MIDI Connectors Selecting the MIDI Connector to Use for Output (MIDI OUT Port) MIDI Send Channel Settings Selecting Sounds on an External MIDI Device Adjusting the Volume of Each Zone (EXTERNAL Zone) Detailed Settings for Transmitted Parts (EXTERNAL) Adjusting the Volume and Pan Setting the Amount of Reverb and Chorus (Reverb/Chorus) Playing Sound Monophonically (Mono/Poly) Setting the Transposition for Each Individual Zone (Transpose) Setting the Key Range (Key Range Lower/Upper) Changing the Range That Plays in Response to the Velocity (Velocity Range Lower/Upper) Changing Tone Elements (ATK/DCY/REL/COF/RES) Smoothly Changing the Pitch (Portamento) Changing the Pitch (Coarse Tune/Fine Tune) Setting the Range for the Change in Pitch with the Bender (Bend Range) Setting the Amount of Modulation Applied (Modulation Depth) Turning Each Controller On and Off Transmitting the Control Change (USER CC/USER CC Value) Making Detailed Settings for Tones Selecting the Tone Making Zone Settings (Zone Info) Setting the Transposition for Each Individual Zone (Transpose) Setting the Key Range for Each Zone (Key Range) Assigning Internal Parts to INTERNAL Zone (Part Assign) Turning the Controllers in Each Zone On and Off Making Tone Settings (Tone Info) Selecting the Part and the Tone to Be Set (Part, Tone) Setting the Reverb/Chorus Depth (Reverb/Chorus Amount) Changing the Effect Applied to the Tone (MFX Type) Playing Sound Monophonically (Mono/Poly) Changing the Pitch (Coarse Tune/Fine Tune) Creating Smooth Pitch Changes (Portamento Switch/Time) Changing Tone Elements (Attack Time/Release Time/Cutoff/ Resonance/Decay Time) Changing the Bend Range (Bend Range) Making Detailed Settings for the ONE TOUCH Tones Making the settings Making Detailed Settings for the Piano Tones (Piano Edit) Opening/Closing the Piano Lid (Lid) Changing the Characteristics of the Mic (Mic Type/Distance) Adjusting the Resonant Sounds When the Keys are Pressed (String Resonance) Making the Midrange Equalizer Settings (EQ SW/EQ Gain/EQ Frequency/EQ Q) Changing the Key Touch (Key Touch) Making Fine Adjustments to the Keyboard Touch (Key Touch Offset) Setting a Constant Volume Level in Response to the Playing Force (Velocity) Changing the Timing of Sounds in Response to the Velocity (Velocity Delay Sens) Changing the Touch Sensitivity According to the Key Range (Velocity Keyfollow Sens) Finely Adjusting the Tuning (Micro Tune) Adjusting Resonance when the Damper Pedal is Depressed (Sympathetic Resonance) Changing Sound Characteristics (Tone Modify) Making the settings Making Detailed Settings for the E.Piano Tones (E.Piano Edit) Selecting the E.Piano Sound Selecting the Amp Type(AMP Type) Applying Effects to the Sound (Effect Type/Depth/Rate) Making the Midrange Equalizer Settings (EQ-SW/EQ Gain/ EQ Frequency/EQ Q) Changing Sound Characteristics (Tone Modify) Detailed Settings for Each Function ([EDIT]) Parameters That Can Be Set Setting Parameters Making System Settings (System) Assigning the Pedal Function When Pedal Mode is Set to SYSTEM Adjusting the Volume (Master Volume) Preventing Equalizer Settings from Being Switched (EQ Mode) Preventing Pedal Settings from Being Switched (Pedal Mode) Retaining the Current Tone Even When Tones Are Switched (Tone Remain) Changing the Clock (Timing) Source (Clock Source) Transmitting Synchronization Messages (Clock Out) Using Program Change Messages to Switch Setups (SETUP Control Channel) Setting the Device ID Number (Device ID) Switching the Pedals Polarity (Pedal/FC1/FC2 Polarity) Selecting the Display Appearance (Display Mode) Selecting the Number of Parts (Part Mode) Setting the Tuning Method (Temperament/Key) Precise Modification of Chord Sonorities (Stretch Tune) Switching Between Reception of GM/GM2 System On and GS Reset Setting the Keyboard Touch (Key Touch) Changing the Key Touch (Key Touch) Pedal and MULTI EFFECTS [CONTROL] Knob Settings (Control) Assigning Functions to Pedals (FC1/FC2 Pedal Assign) Changing the MULTI EFFECTS [CONTROL] Knob Settings (Control Knob Assign) Changing the Slider Settings (Slider Assign) MFX Source MFX Structure Setting the Multi-Effects, Reverb, and Chorus Effects (Effects) Making Multi-Effects Settings Making Reverb Settings Other Chorus Settings Chorus Type Making the Sound Control Settings (Sound Control) 3. Managing Setup Files (File Utility/USB) Saving Setup Files to the Memory (Save SETUP File) Calling Up Setup Files from Memory (Load SETUP File) Deleting Files from Memory (File Delete) Setting MIDI Receive Parts (Part Parameter) Selecting the Part to Be Set (Part/Tone) Setting the Receive Channel (Receive Channel) Setting the Volume and Pan Setting the Required Polyphony (Voice Reserve) Preventing Parts from Being Played (Part Switch) Making the Effect ON/OFF Settings (MFX Switch) Setting Reception and Blocking of MIDI Messages from External MIDI Controllers Changing Patterns (Rhythm Pattern) Adjusting the Tempo (Tempo) Making the Rhythm and Arpeggio Settings (Rhythm/Arpeggio) Making the rhythm Settings Changing the Drum Set (Rhythm Set) Changing the Pattern Without Changing the Drum Set (Rhythm Set Change) Changing the Accent Strength (Rhythm Accent) Changing the Beat Syncopation (Rhythm/Arpeggio Grid) Making the Sound More Staccato or Legato (Rhythm/Arpeggio Duration) Selecting the MIDI Output Connector (Rhythm MIDI Out Port) Selecting the MIDI Output Channel (Rhythm MIDI Out Channel) Adjusting the Tempo (Arpeggio Tempo) Making Arpeggio Settings Page About V-LINK V-Link Settings Connection Examples Other Functions (Utility) Transferring the RD-700SXs Settings to an External MIDI Device (Bulk Dump) Bulk Dump Temporary Bulk Dump SETUP Restoring saved settings to the RD- 700SX Factory Reset All Factory Reset Current Restoring the settings to the factory condition (Factory Reset) Connecting External MIDI Devices Recording RD-700SX Performances to an External MIDI Sequencer Connecting to an External Sequencer Recording the Performance Exiting Rec Mode About the Local Switch RD-700SX Playing the RD-700SXs Internal Sound Generator from an External MIDI Device Switching Tones Making Connections Connecting to Your Computer via USB (USB Mode) Switching to MIDI Mode Switching to USB Storage Mode About USB Functions Exchanging Files with Computers (Storage Mode) Exiting Storage Mode Connections Exchanging MIDI Messages with Your Computer (MIDI Mode) Switching USB Drivers Caution when disconnecting the USB cable What is the USB MIDI Driver? Page Troubleshooting Power Not Coming On No Sound No Sound for Specific Part No Sound From the Connected MIDI Device Troubleshooting Troubleshooting Error Messages/Other Messages Other Messages Error Messages Effect/Parameter List 05: SUPER FILTR (SUPER FILTER) 04: LOW BOOST 03: ISOLATOR 02: SPECTRUM 06: STEP FILTER 09: HUMANIZER 08: AUTO WAH 07: ENHANCER 10: SP.SIMULATR (SPEAKER SIMULATOR) 12: STEP PHASER Specifications of each Speaker Type 13: MULT PHASER (MULTI STAGE PHASER) 17: TREMOLO 14: INF PHASER (INFINITE PHASER) 15: RING MODLTR (RING MODULATOR) 16: STEP R.MOD (STEP RING MODULATOR) 18: AUTO PAN 21: ROTARY 19: STEP PAN 20: SLICER 22: VK ROTARY 24: FLANGER 23: CHORUS 25: STEP FLANGR (STEP FLANGER) 28: SPACE-D 27: TREMOLO CHO (TREMOLO CHORUS) 26: HEXA-CHORUS 29: 3D CHORUS 31: 3D S.FLANGR (3D STEP FLANGER) 30: 3D FLANGER 32: 2BND CHORUS (2BAND CHORUS) 33: 2BND FLANGR (2BAND FLANGER) A chorus effect that lets you apply an effect independently to the low- A flanger that lets you apply an effect independently to the low- 34: 2BND S.FLN (2BAND STEP 35: OVERDRIVE Specifications of each Speaker Type 38: VS DIST(VS DISTORTION) 37: VS OVRDRIVE (VS OVERDRIVE) 39: GTR AMP SIM (GUITAR AMP SIMULATOR) 40: COMPRESSOR 44: LONG DELAY 43: DELAY 42: GATE 45: SERIAL DLY (SERIAL DELAY) Produces three delay sounds; center, left and right. 47: 3TP PAN DLY (3TAP PAN DELAY) 48: 4TP PAN DLY (4TAP PAN DELAY) 1 50: REVERSE DLY (REVERSE DELAY) Stereo location of each delay This effect has four delays. 51: SHUFFLE DLY (SHUFFLE DELAY) 52: 3D DELAY Adds a shuffle to the delay sound, giving the sound a bouncy delay effect with a swing feel. 53: T-CTRL DLY(TIME CTRL DELAY) 56: LOFI NOISE 55: TAPE ECHO 54: LONG TC DLY (LONG TIME CTRL DELAY) 57: LOFI COMPRS (LOFI COMPRESS) 61: PCH SHIFTER (PITCH SHIFTER) 58: LOFI RADIO 60: PHONOGRAPH 59: TELEPHONE 62: 2V P.SHIFTR (2VOICE PITCH Adds reverberation to the sound, simulating an acoustic space. 64: REVERB 63: S.P.SHIFTER (STEP PITCH SHIFTER) A pitch shifter in which the amount of pitch shift is varied by a 16-step sequence. Page Page 76: FLN This effect connects a chorus and a flanger in series. 77: CHO This effect connects a flanger and a delay in series. 79: PIANO EFX (PIANO EFFECTS) 83: VR AUTO WAH 82: VR TREMOLO 81: VR CHORUS 86: *STEREO EQ (STEREO EQUALIZER) 85: ORGAN MULTI 84: VR PHASER 87: *OVERDRIVE 91: *ENHANCER 90: *SPECTRUM 88: *DISTORTION 89: *PHASER 92: *AUTO WAH 95: *LIMITER 94: *COMPRESSOR 93: *ROTARY 96: *HEXA-CHO (HEXA-CHORUS) 99: *STEREO CHO (STEREO CHORUS) 97: *TREMOL CHO (TREMOLO CHORUS) 98: *SPACE-D 100: *ST.FLANGER (STEREO FLANGER) 102: *STEREO DLY (STEREO DELAY) 101: *STEP FLNGR (STEP FLANGER) 103: *MOD DELAY (MODULATION 104: *TRIPLE DLY (TRIPLE TAP DELAY) This effect adds modulation to the delayed sound, producing an effect similar to a flanger. The Triple Tap Delay produces three delay sounds; center, left and right. 105: *QUAD.DELAY (QUADRUPLE TAP 106: *T-CTRL DLY (TIME CONTROL 107: *2V PCH SFT (2 VOICE PITCH 108: *FBK P.SFT (FEEDBACK PITCH 110: *GATE REV (GATED REVERB) 109: *REVERB Page Page 121: *FLANGR note (2): 125: *CHO/FLNGR (CHORUS/FLANGER) 124: *FLANGR/DLY (FLANGER/DELAY) DLY (FLANGER note (1): The RD-700SXs Chorus effect unit can also be used as a stereo delay unit. Chorus Parameter 6: CATHEDRAL Reverb Parameter Tone List [PAD] [STRINGS] [ORGAN] [GTR/BASS] [RHY/GM2] [VOICE/SYNTH] [BRASS/WINDS] Tone List Rhythm Set List Rhythm Set List * -----: No sound. Rhythm Set List * -----: No sound. Arpeggio Style List Rhythm Pattern List No. Rhythm Pattern No. Rhythm Pattern No. Rhythm Pattern Setup List Shortcut List * [A] + [B] indicates that you are to hold down [A] and press [B]. You can easily change settings for the following functions using a number of related buttons. MIDI Implementation Control Change Note on Note off Channel Voice Messages Program Change System Exclusive Message System Realtime Message Channel Mode Messages Chorus Parameters Master Coarse Tuning Master Fine Tuning Global Parameter ControlReverb Parameters Universal Realtime System Exclusive Messages Data Request 1 RQ1 (11H) Key-based Instrument Controllers Scale/Octave Tuning Adjust Data Transmission Volume (Controller number 7) Data Entry (Controller number 6, 38) Portamento Time (Controller number 5) Pitch Bend Change Program Change System Exclusive Messages System Realtime Messages Channel Mode Messages Indivisual Parameters 1 RD-700SX (Model ID = 00H 00H 03H) 3. Parameter Address Map Page Page <Example4> What is the nibbled expression of the decimal value 1258? From the preceding table, 5AH = 90 <Example1> What is the decimal expression of 5AH? Decimal and Hexadecimal Table <Example2> Getting Temporary Performance data (RQ1) <Example1> Setting CHORUS TYPE to DELAY (DT1) How to calculate the checksum <Example4> B3 64 00 65 00 06 0C 26 00 64 7F 65 7F Setup Name of MIDI data are described the ASCII code in the table below. ASCII Code Table D: decimal H: hexadecimal * SP is space. MIDI Implementation Chart Page Main Specifications Index E D C B M L K I R P O N V U T S Z W Purpose-Oriented Index Key Range Control Effects (Reverb, Chorus, Multi-Effects) IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS DECLARATION OF CONFORMITY Compliance Information Statement NOTICE AVIS FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT Owners Manual Information EGYPT REUNION