58
Using the Convenient Functions in Performances
If you want to use the changed content as a new Setup, use the following procedure
to save the settings to a Setup.
You can also change the name of a Setup.
You can store 100 Setups on the RD-700SX.
fig.Q2-19p
1
Press [WRITE], getting the indicator to light.
The Setup screen appears.
fig.Q2-20ge
2
Press CURSOR [ ]/[ ] to move the cursor to the positions where
the characters are to be input.
3
Press [INC]/[DEC] to enter the characters.
The following characters are available.
space, ! " # $ % & ' ( ) * + , - . / 0–9, : ; < = > ? @ A–Z, [ \ ] ^ _ ` a–z, { | } ~
When [F2] is pressed, a single-character blank space is inserted; pressing [F1] deletes
one character.
4
Repeat steps 2–3 to input the name.
5
Press CURSOR [ ] to move the cursor to the destination Setup
name.
6
Select the save-destination Setup, either by pressing [INC]/[DEC].
When using the TONE SELECT buttons to input Setup numbers, press [ENTER]
afterwards to set the number.
fig.Q2-22g
Storing Settings to Setups ([WRITE])
12 4,76 3 4,78,9
New Setup Name
Destination
You can use the TONE
SELECT buttons to directly
specify and enter characters.
The file that the file name
starts from “. (dot)” cannot be
written.
Pressing CURSOR [ ],
even while inputting the name,
moves the cursor to the save-
destination Setup number.
RD-700SX_e.book 58ページ 2006年3月23日 木曜日 午後2時52分