Roland RD-700SX , Changing the Keyboards Split Point,

39
Performing with the Keyboard
1
Press [SPLIT], getting the indicator to light.
ZONE SWITCH [LOWER 1] lights.
Try fingering the keyboard.
fig.Q1-16g
The UPPER tone plays in the right-hand section of the keyboard, and the LOWER
tone plays in the left-hand section.
fig.Q1-17sp
2
To exit Split mode, press [SPLIT] once more, and the indicator light
goes out.
Changing the Keyboard’s Split Point
You can change the point at which the keyboard is divided (the Split Point) in Split
mode.
1
Hold down [SPLIT] for several seconds.
A screen such as the following appears, and the current value of the setting is
displayed.
fig.Q1-18g
2
Hold down [SPLIT] and press a key.
When you release [SPLIT], the previous display will reappear.
The split-point key is included in the LOWER section.
When the split point is set, the Key Range (p. 69) in each zone is divided into left and
right ranges with the split point as the boundary, and the following values are set.
• UPPER 1, UPPER 2: Split Point+1–C8
• LOWER 1, LOWER 2: A0–Split Point
Split Point (B3)
UPPERLOWER
You can change the split point,
adjusting it in semitone
increments, by holding down
[SPLIT] and pressing [INC] of
[DEC].
When the split point is
changed, the Key Range (p. 69)
value also changes.
You can freely set whatever
key ranges (registers) you like
to each zone.
For details, refer to “Setting
the Key Range for Each
Zone (Key Range)” (p. 69).
UPPER1
UPPER2
LOWER1
LOWER2
RD-700SX_e.book 39ページ ２００６年３月２３日 木曜日 午後２時５２分