43
Performing with the Keyboard

The RD-700SX can apply a reverb effect to the notes you play on the keyboard.

Applying reverb adds pleasing reverberation to what you play, so it sounds almost

as if you were playing in a concert hall.

fig.Q1-24rev
1

Press the [REVERB].

The reverb type switches each time you press the [REVERB].

2

Adjust the REVERB [DEPTH] knob to select the amount of reverb

effect to be applied.

Rotating the knob clockwise applies a deeper reverb, and rotating it

counterclockwise applies less reverb.

You can apply a chorus and delay effect to the notes you play on the keyboard. By

adding the chorus and delay effect, you can give the sound greater dimension, with

more fatness and breadth.

fig.Q1-25cho
1

Press the [CHORUS/DELAY].

The chorus type switches each time you press the [CHORUS/DELAY].

Adding Reverberation to the Sound ([REVERB])
TYPE explanation
OFF (unlit) No reverb is used.
ROOM Simulates the reverberation of a room.
HALL Simulates the reverb of a large concert hall.
CATHEDRAL Simulates the reverberation of a cathedral.
Adding Breadth to the Sound ([CHORUS/DELAY])
TYPE explanation
OFF (unlit) Chorus and Delay is not used.
CHORUS You can give the sound greater dimension, with more fatness
and breath.
DELAY This effect delays the sound to produce an echo-like effect.
“Making Reverb Settings” (p.
87).
You can select the reverb types
other than those shown at the
left with ““Reverb Type” (p.
87)” in “3. Effects” in the Edit
screen. In this case, the
[REVERB] indicator
corresponding to the selected
type flashes.
When the Tone Info’s Reverb
Amount setting is set to “0,”
then no effect is applied, even
when the REVERB knob is
turned (p. 71).
“Setting Chorus and Delay”
(p. 88).
You can select the chorus types
other than those shown at the
left with ““Chorus Type” (p.
88)” in “3. Effects” in the Edit
screen. In this case, the
[CHORUS/DELAY] indicator
corresponding to the selected
type flashes.
RD-700SX_e.book 43ページ 2006年3月23日 木曜日 午後2時52分