52
Using the Convenient Functions in Performances
In addition to chorus (p. 43) and reverb (p. 43), the RD-700SX also allows you to
apply “multi-effects” to sounds. Multi-effects provides a collection of 125 different
effects, such as distortion and rotary, from which you can choose.
You can use two multi-effects simultaneously; these are referred to as MFX1 and
MFX2.
The factory settings have a suitable effect assigned to each of the tones.
fig.Q2-10p
1
Press MULTI-EFFECTS [ON/OFF], getting its indicator to light.
2
Adjust the amount of multi-effect applied with the MULTI-EFFECTS
[CONTROL] knob.
3
To cancel the multi-effect, press MULTI-EFFECTS [ON/OFF], the
indicator light goes out.
Applying Effects to the Sound (Multi-Effects)
“Effect/Parameter List”
(p. 112).

1,2,3

The allowable values adjusted
with the MULTI-EFFECTS
[CONTROL] knob vary with
the selected effect. For details,
refer to “MFX Control” (p. 87).
Effects are not applied to
Tones for which the Tone Info
MFX settings are set to
“00 THRU” (p. 71).

Specifying the Zone on Which to Use the Multi-effects

With the RD-700SX, you can use two different multi-effects simultaneously. Thus,
the RD-700SX features settings parameters called “MFX Source” for selecting the
multi-effects settings to be used and “MFX Dest” for selecting the zone to which the
multi-effects are applied. Therefore, when multiple zones are being played, please
note that according to the MFX Source and MFX Dest settings, there may be certain
zones to which no multi-effects are applied.
For more detailed information, refer to MFX Source (p. 86), and MFX Dest (p. 87).
You can change a variety of Multi-effects settings beyond just the Multi-effects type
by holding down [SHIFT] and pressing MULTI-EFFECTS [ON/OFF]. For details,
refer to “Making Multi-Effects Settings” (p. 86).
RD-700SX_e.book 52ページ ２００６年３月２３日　木曜日　午後２時５２分