Chapter 4. Memory Settings (Utility/Card Mode)

The Compare Function

For the Patch Tone Copy and Patch Effect Copy operations, you can use the Compare function. The Compare function allows you to play the Patch currently occupying the copy source. To play the Patch of the copy source, press [UNDO/COMPARE] to access the PATCH COMPARE display. The copy-source Patch can be changed in this display as well, but it is not possible to select patches from XP-A–E. After selecting the copy source Patch, press [EXIT] to return to the previous display.

fig.4-15.e

Copy source Patch (group, number, name)

*The Compare function cannot be used with Patch Tone Copy if either TEMP or an XP-A–E patch is selected as the copy source patch (Source).

*The Compare function cannot be used with Patch Effect Copy if PERFORM is selected as the copy source (Source).

*Please be aware that when the Compare function is used to play a Patch, it may sound slightly different than when it is played normally.

Patch Name Copy

The name of a Patch will be copied to the current Patch.

Copy source Patch (group, number, name)

Rhythm Set Copy

When you want to copy Rhythm Set settings to the current Rhythm Set, press [UTIL/CARD] in Rhythm Set mode and perform Copy operation.

Rhythm Key Copy

Individual key settings in a Rhythm Set will be copied to each key in the current Rhythm Set.

 

 

 

 

 

 

 

 

 

Copy source Rhythm Set

 

 

Copy source

(group, number)

 

 

Rhythm Set name

 

 

 

 

 

 

 

 

 

Copy source Key Copy destination Key

*The copy source and copy destination Key parameters can also be set by pressing a key on the keyboard.

*When the Copy operation is executed, an “*” will be displayed in front of the copy-destination key.

The Compare Function

The Compare function can be used during the Rhythm Key Copy operation.

The Compare function allows you to play the Rhythm Set currently occupying the copy source. To play the Rhythm Set of the copy source, press [UNDO/ COMPARE] to access the RHYTHM COMPARE display. The copy-source Rhythm Set can be changed in this display as well, but it is not possible to select patches from XP-A–E. After selecting the copy source Rhythm Set, press [EXIT] to return to the previous display.

fig.4-18.e

Copy source Rhythm Set (group, number, name)

*If one of the XP-A–E Rhythm Sets is selected as the copy- source Rhythm Set (Source), the Compare function is not available.

*Please be aware that when the Compare function is used to play a Rhythm Set, it may sound slightly different than when it is played normally.

Rhythm Set Name Copy

The name of a Rhythm Set will be copied to the current Rhythm Set.

Copy source Rhythm Set (group, number, name)

118

Page 118
Image 118
Roland XP-30 owner manual Rhythm Set Copy, Patch Name Copy, Rhythm Key Copy, Rhythm Set Name Copy, 118