Roland XP-30 owner manual Press EXP D or EXP E, and verify that you can select

9	Press [EXP D] or [EXP E], and verify that you can select
	patches from Wave Expansion Boards D or E. [EXP D] or [EXP
	E] indicator will light, and the following display will appear.
fig.Q-04

Getting Ready

Quick Start

The example here depicts what you would see if the SR-JV80-13 “Vocal Collection” Wave Expansion Board were installed in the EXP-D slot.

If you can’t choose any Wave Expansion Board patches, it’s possible that the installed Wave Expansion Board is not being recognized correctly. Turn off the power as described in “Turning Off the Power” (p. 26), and

re-install the Wave

Expansion Board correctly.

19