Roland XP-30 owner manual Midi Implementation, 183, Polyphonic Aftertouch, Control Change

MIDI Implementation

Model:	XP-30 (64 Voice Expandable Synthesizer)
Version:	1.00
Date:	Jan. 18 1999

1. Data Reception (sound source section)

■Channel Voice Messages

●Note Off

status	2nd byte	3rd byte
8nH	kkH	vvH
9nH	kkH	00H
n=MIDI channel number:		0H - FH (ch.1 - ch.16)
kk=note number:		00H - 7FH (0 - 127)
vv=Note Off velocity:		00H - 7FH (0 - 127)

*Not received in Performance mode when the Rx parameter (PERFORM/MIDI/MIDI) is OFF.

*Not received by the Rhythm Part (Part 10) when the Env Mode parameter (RHYTHM/ CONTROL/CONTROL) is NO-SUS.

●Note On

status	2nd byte	3rd byte
9nH	kkH	vvH
n=MIDI channel number:		0H - FH (ch.1 - ch.16)
kk=note number:		00H - 7FH (0 - 127)
vv=Note On velocity:		01H - 7FH (1 - 127)

*Not received in Performance mode when the Rx parameter (PERFORM/MIDI/MIDI) is OFF.

●Polyphonic Aftertouch

status	2nd byte	3rd byte
AnH	kkH	vvH
n=MIDI channel number:		0H - FH (ch.1 - ch.16)
kk=note number:		00H - 7FH (0 - 127)
vv=Aftertouch:		00H - 7FH (0 - 127)

*This message is received if the Aftertouch parameter (SYSTEM/CONTROL/CONTROL SOURCE) is POLY or CH&POLY.

*Not received in Performance mode when the Rx parameter (PERFORM/MIDI/MIDI) is OFF.

*Not received in GM mode.

●Control Change

*If the corresponding Controller number is selected for the Control 2 or Control 3 parameter (PATCH/CONTROL/CONTROL SOURCE), the corresponding effect will occur.

*If a Controller number that corresponds to the Control 1 parameter or Control 2 parameter (SYSTEM/CONTROL/SYS-CTRL ASSIGN) is selected, the specified effect will apply if Control 2 parameter or Control 3 parameter (PATCH/CONTROL/ CONTROL SOURCE) is set to SYS-CTRL1 or SYS-CTRL2.

*Not received in Performance mode when the Rx parameter (PERFORM/MIDI/MIDI) or the Control Change Receive Switch is OFF.

❍Bank Select (Controller number 0,32)

status	2nd byte	3rd byte
BnH	00H	mmH
BnH	20H	llH
n=MIDI channel number:		0H - FH (ch.1 - ch.16)
mm,ll=Bank number:		00 00H - 7F 7FH (bank.1 - bank.16384)

*Not received when the Program Change parameter or Bank Select parameter (SYSTEM/ MIDI/RECEIVE MIDI) is OFF.

*Not received in GM mode.

*The Patches corresponding to each Bank Select are as follows.

Bank Select	Program No	Group	Patch No.
MSB LSB

——————+—————+————————————+————————————————————————————————————————

80	0	0	- 127	User	1	- 128
81	0	0	- 127	PR-A	1	- 128
81	1	0	- 127	PR-B	1	- 128
81	2	0	- 127	PR-C	1	- 128
81	3	0	- 127	GM	1	- 128
81	4	0	- 127	PR-E	1	- 128
84	0	0	- 127	XP-A (Session)	1	- 128
84	1	0	- 126	XP-A	129	- 255
84	2	0	- 127	XP-B (Orchestral)	1	- 128
84	3	0	- 126	XP-B	129	- 255
84	4	0	- 127	XP-C (Techno Collection)	1	- 128
84	5	0	- 127	XP-C	129	- 256
84	6	0	- 127	XP-D	1	- 128
84	7	0	- 127	XP-D	129	- 256
84	8	0	- 127	XP-E	1	- 128
84	9	0	- 127	XP-E	129	- 256

*The Performance corresponding to each Bank Select are as follows.

Bank Select	Program No	Group	Performance No.
MSB LSB

——————+—————+————————————+————————————————————————————————————————

80	0	0	- 31	User	1	- 32
81	0	0 - 31 PR-A			1 - 32
81	1	0 - 31 PR-B			1 - 32

*The Rhythm set corresponding to each Bank Select are as follows.

Bank Select	Program No	Group	Rhythm set No.
MSB LSB

——————+—————+————————————+————————————————————————————————————————

80	0		0	-	1		User			1	- 2
81	0		0 - 1 PR-A							1 - 2
81	1		0 - 1 PR-B							1 - 2
81	2		0 - 1 PR-C							1 - 2
81	3		0 - 1 GM							1 - 2
81	4		0 - 1 PR-E							1 - 2
84	0		0	- 7		XP-A		(Session)		1	- 8
84	4		0	- 7		XP-C		(Techno Collection)		1	- 8
84	6	0	- 127			XP-D			1	- 128
84	7	0	- 127			XP-D			129	- 256
84	8	0	- 127			XP-E			1	- 128
84	9	0	- 127			XP-E			129	- 256

❍Modulation (Controller number 1)

status	2nd byte	3rd byte
BnH	01H	vvH
n=MIDI channel number:		0H - FH (ch.1 - ch.16)
vv=Modulation depth:		00H - 7FH (0 - 127)

❍Breath Type (Controller number 2)

status	2nd byte	3rd byte
BnH	02H	vvH
n=MIDI channel number:		0H - FH (ch.1 - ch.16)
vv=control value:		00H - 7FH (0 - 127)

❍Foot Type (Controller number 4)

status	2nd byte	3rd byte
BnH	04H	vvH
n=MIDI channel number:		0H - FH (ch.1 - ch.16)
vv=control value:		00H - 7FH (0 - 127)

❍Portamento Time (Controller number 5)

status	2nd byte	3rd byte
BnH	05H	vvH
n=MIDI channel number:		0H - FH (ch.1 - ch.16)
vv=Portamento Time:		00H - 7FH (0 - 127)

*The Time parameter (PATCH/CONTROL/PORTAMENTO) will change.

❍Data Entry (Controller number 6, 38)

status	2nd byte	3rd byte
BnH	06H	mmH
BnH	26H	llH

n=MIDI channel number: 0H - FH (ch.1 - ch.16)

mm,ll= the value of the parameter specified by RPN/NRPN mm=MSB, ll=LSB

Appendices

❍Volume (Controller number 7)

status	2nd byte	3rd byte
BnH	07H	vvH
n=MIDI channel number:		0H - FH (ch.1 - ch.16)
vv=Volume:		00H - 7FH (0 - 127)

183