Roland XP-30 owner manual Connecting with Midi Connectors, 135, RSC-15APL, RSC-15AT

Chapter 6. Getting the Full Potential of the XP-30

4.Connect the other end of the Computer cable to the COMPUTER connector on the left side of the XP-30.

Apple Macintosh

Modem Port or

Printer Port

XP-30 Rear Panel

PC

Optional computer cable

RSC-15APL

Serial Port (OO)

Optional computer cable

RSC-15AT

*In order to hear the sounds of the XP-30, you will also need to connect an AC cord, and audio cables or headphones. If you have not yet made connections, please read “Making Connections” (p. 24). If you are finished making connections, read from the “Turning On the Power” (p. 26).

Connecting with MIDI Connectors

If a MIDI interface (Roland Super MPU64, etc.) is connected to your computer, or if a MIDI interface adaptor is connected, you can use the MIDI connectors to make connections.

* For details on how to install the MIDI interface, refer to the owner’s manual for your MIDI interface.

1.Turn off the XP-30, your computer and all peripheral devices.

*To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.

2.Set the COMPUTER switch on the rear panel of the XP-30 to MIDI.

* Before changing the setting of the Computer switch, you must first turn off the power on the XP-30.

Chapter 6

135