Roland XP-30 owner manual Functions of Rhythm Set Parameters, Naming a Rhythm Set Common

Chapter 3. Creating Your Own Sounds

Functions of Rhythm Set Parameters

■Naming a Rhythm Set (COMMON)

RHYTHM NAME (Rhythm Set Name)

You can assign a name of up to 12 characters to a Rhythm Set.

*For details on assigning names, refer to “Assigning a Name”

(p. 46).

■Setting Effects for a Rhythm Tone

(EFFECTS)

*Rhythm Sets use the effect settings of the Performance currently selected in Performance mode. You can modify the Performance effect settings from inside Rhythm Set mode, but they are not stored as Rhythm Set settings. If you wish to keep the effect settings, you need to store them as Performance settings.

OUTPUT

Specify the output for each key.

Output Assign (Output Assign/Output Level)

For the output of each key, specify whether or not it will be sent through Multi-Effects, and adjust the volume level. MIX: output to the OUTPUT jack without passing through

Multi-Effects.

EFX: output to the OUTPUT jack after passing through Multi-Effects.

Chorus (Chorus Send Level)

Adjust the amount of Chorus for each key.

Reverb (Reverb Send Level)

Adjust the amount of Reverb for each key.

PERFORM EFX TYPE (Performance EFX Type)

*If EFX Source has been set to use the EFX parameter settings of the Patch assigned to one of the Parts, the Part number will be shown in the upper left of the display.

Type (EFX Type)

Select the type of EFX. For details refer to “Multi-Effects Types (EFX Parameter)” (p. 93).

*If you have selected the EFX parameter settings of one of the Patches assigned to a Part as the EFX Source, the EFX Type of that Patch will be displayed.

Source (EFX Source)

Select the EFX parameter settings that will be used by the Performance. If you wish to use the EFX parameter settings of the Performance, select PERFORM. If you wish to use the EFX parameter settings of the Patch assigned to one of the Parts, select the Part number.

When the EFX Parameter Settings of a Patch Are Selected

When the EFX parameter settings of a Patch are selected, those settings will be displayed in the EFX parameter setting display of the Performance, and you will be able to modify them. If you wish to keep the Patch EFX parameter settings that you modify, rewrite the Patch settings. The modified Patch EFX parameter settings will be lost if you select a different Patch.

PERFORM EFX PRM (Performance EFX Parameters)

The EFX parameters for the selected EFX Type will be displayed. For details refer to “Multi-Effects Types (EFX Parameter)” (p. 93).

*If EFX Source has been set to use the EFX parameter settings of the Patch assigned to one of the Parts, the Part number will be shown in the upper left of the display.

PERFORM EFX OUT (Performance EFX Output)

These parameters specify the output for the keys for which EFX was selected in Output Assign.

*For keys which have an Output Assign setting of MIX, the settings of this display will be ignored.

Mix Out (EFX Output Level)

Adjust the volume of the direct sound and Multi-Effects sound.

Chorus (Chorus Send Level)

Adjust the amount of Chorus applied to the sound that passes through Multi-Effects.

Reverb (Reverb Send Level)

Adjust the amount of Reverb applied to the sound that passes through Multi-Effects.

88