Roland XP-30 owner manual Tremolo-Chorus, Space-D, Stereo-Chorus

12: TREMOLO-CHORUS

Tremolo Chorus is a chorus effect with added Tremolo (cyclic modulation of volume).

L in	L out
	Balance D
	Balance W
	Tremolo Chorus
	Balance W
R in	R out
	Balance D

Pre Dly (Pre Delay Time)

Adjust the time delay from when the direct sound begins until the chorus sound is heard.

ChoRate (Chorus Rate)

Adjust the modulation speed of the chorus effect.

ho Dpt (Chorus Depth)

Adjust the modulation depth of the chorus effect.

Phase (Tremolo Phase)

Adjust the spread of the tremolo effect.

TrmRate (Tremolo Rate) #

Adjust the modulation speed of the tremolo effect.

Trm Sep (Tremolo Separation)

Adjust the spread of the tremolo effect.

Balance (Effect Balance) #

Adjust the volume balance between the direct sound and the tremolo chorus sound. With a setting of D100:0W only the direct sound will be output, and with a setting of D0:100W only the tremolo chorus sound will be output.

Level (Output Level)

Adjust the output level.

13: SPACE-D

Space-D is a multiple chorus that applies two-phase modulation in stereo. It gives no impression of modulation, but produces a transparent chorus effect.

Balance D	2-Band
L in		L out
	EQ
Space D	Balance W
Space D	Balance W
R in	2-Band	R out
	EQ
Balance D

Pre Dly (Pre Delay Time)

Adjust the time delay from when the direct sound begins until the processed sound is heard.

Rate #

Adjust the rate of modulation.

Depth

Adjust the depth of modulation.

Chapter 3. Creating Your Own Sounds

Phase

Adjust the spatial spread of the sound.

LowGain

Adjust the gain of the low frequency range.

Hi Gain

Adjust the gain of the high frequency range.

Balance (Effect Balance) #

Adjust the volume balance between the direct sound and the chorus sound. With a setting of D100:0W only the direct sound will be output, and with a setting of D0:100W only the chorus sound will be output.

Level (Output Level)

Adjust the output level.

14: STEREO-CHORUS

This is a stereo chorus. A filter is provided so that you can adjust the timbre of the chorus sound.

	Balance D	2-Band		3
L in			L out
		EQ
				Chapter
Chorus		Balance W
Chorus		Balance W
R in		2-Band	R out
		EQ
	Balance D

Pre Dly (Pre Delay Time)

Adjust the time delay from when the direct sound begins until the processed sound is heard.

Rate #

Adjust the rate of modulation.

Depth

Adjust the depth of modulation.

Phase

Adjust the spatial spread of the sound.

Filter (Filter Type)

Select the type of filter.

OFF: a filter will not be used

LPF: cut the frequency range above the cutoff frequency

HPF: cut the frequency range below the cutoff frequency

Cutoff (Cutoff Frequency)

Adjust the basic frequency of the filter.

LowGain

Adjust the gain of the low frequency range.

Hi Gain

Adjust the gain of the high frequency range.

Balance (Effect Balance) #

Adjust the volume balance between the direct sound and the chorus sound. With a setting of D100:0W only the direct sound will be output, and with a setting of D0:100W only the chorus sound will be output.

97