Roland XP-30 owner manual Copying Sound Source, Settings Copy, Performance Copy, Patch Copy

Chapter 4. Memory Settings (Utility/Card Mode)

Copying Sound Source	Performance Name Copy
Settings (COPY)	The name of a Performance will be copied to the current
	Performance.
This function lets you copy data of any Patch, Performance,
or Rhythm Set into the current Patch, Performance, or
Rhythm Set. Using this function effectively makes editing
easier.
		Copy source Performance (group, number, name)

■Performance Copy

To copy the settings of a Performance, press [UTIL/CARD] in Performance mode, then perform Copy operation.

Performance Part Copy

The Part settings of a Performance will be copied to the Part you specify of the current Performance.

Copy source Performance	Copy source
(group, number)	Performance name

Copy source Part Copy destination Part

*To specify the currently selected Performance as the copy source, set Source to TEMP.

*When the Copy operation is executed, an “*” will be displayed in front of the copy-destination part name.

Performance Effects Copy

The effects settings of a Performance or Patch will be copied to the current Performance.

Copy source Copy source Patch/Performance (group, number, name)

Press [] to move to the next display, and then select the contents of the effect that you wish to copy.

Copy type

ALL: Multi-effects, chorus, and reverb settings

EFX: Multi-effects settings

CHORUS: Chorus settings

REVERB: Reverb settings

CHO&REV: Chorus and reverb settings

■Patch Copy

When you want to copy Patch settings to the current Patch, press [UTIL/CARD] in Patch mode and perform Copy operation.

Patch Tone Copy

Tone settings of a Patch will be copied to the Tone you specify of the current Patch.

Copy source Patch	Copy source Patch name
(group, number)		Copy destination Tone

Copy source Tone

*To specify the currently selected Patch as the copy source, set Source to TEMP.

*When the Copy operation is executed, an “*” will be displayed in front of the copy-destination tone.

Patch Effects Copy

The effects settings of a Patch or Performance will be copied to the current Patch.

Copy source Copy source Patch/Performance (group, number, name)

Press [] to move to the next display, and then select the contents of the effect that you wish to copy.

Copy type

ALL: Multi-effects, chorus, and reverb settings

EFX: Multi-effects settings

CHORUS: Chorus settings

REVERB: Reverb settings

CHO&REV: Chorus and reverb settings

Chapter 4

117