Roland XP-30 owner manual Saving and Loading Data, Controlling External Midi Devices

Adjusting the Keyboard Response

Sens parameter (SYSTEM/CONTROL/KEYBOARD)

Set the Keyboard to Produce a Fixed Velocity

Vel parameter (SYSTEM/CONTROL/KEYBOARD)

■Saving and Loading Data

*After completing these procedures, press [UTIL/CARD] to return to the PLAY display.

Formatting a Memory Card

1.Press [UTIL/CARD].

2.Select “1: CARD” on the UTIL 2 display.

3.Select “1: FORMAT.”

4.Press [ENTER].

Saving Patch Settings

1.In Patch mode, press [UTIL/CARD].

2.Select “1: WRITE” on the UTIL 1 display.

3.Specify the writing destination.

4.Press [ENTER].

If a message of “Internal Write Protect=ON” appears, change it to “OFF” and press [ENTER] twice.

*If you wish to hear the sound of the Patch in the selected writing destination, press [UNDO/COMPARE]. Press it once again to return to the previous display.

Saving Performance Settings

1.In Performance mode, press [UTIL/CARD].

2.Select “1: WRITE” on the UTIL 1 display.

3.Specify the writing destination.

4.Press [ENTER].

If a message of “Internal Write Protect=ON” appears, change it to “OFF” and press [ENTER] twice.

Saving Rhythm Set Settings

1.In Rhythm Set mode, press [UTIL/CARD].

2.Select “1: WRITE” on the UTIL 1 display.

3.Specify the writing destination.

4.Press [ENTER].

If a message of “Internal Write Protect=ON” appears, change it to “OFF” and press [ENTER] twice.

Quick Reference of Procedures

Saving User Memory Settings and System Settings to Memory Card as a Unit

1. Press [UTIL/CARD].

2. Select “3: SAVE” on the UTIL 2 display.

3. Assign a file name.

4. Press [ENTER].

Deleting a File from Memory Card

1. Press [UTIL/CARD].

2. Select “1: CARD” on the UTIL 2 display.

3. Select “3: DELETE.”

4. Select the file that you wish to delete.

5. Press [ENTER].

Checking the Free Area of a Memory Card, etc.

1. Press [UTIL/CARD].

2. Select “1: CARD” on the UTIL 2 display.

3. Select “4: INFO.”

■ Controlling External MIDI

Devices

Changing the Transmit Channel for Patch Mode

Tx-Ch parameter (SYSTEM/MIDI/PATCH MIDI)

Changing the Transmit Channel for Performance Mode (for each Part)

Channel parameter (PERFORM/MIDI/MIDI)

* Keyboard and controller movements (MIDI messages) from the
controller section are transmitted differently depending on
whether a single-type Performance or a layer-type Performance
is selected. If a single-type Performance is selected, MIDI
messages will be transmitted on the MIDI channel of the Part
that is being played by the keyboard. If a layer-type Performance
is selected, MIDI messages will be transmitted on the MIDI
channel of the Parts whose Tx parameter (PERFORM/MIDI/	Appendices
MIDI) is turned ON.

145