RuggedCom RS400 manual IP Gateways, Destination

Administration

1.6 IP Gateways

These parameters provide the ability to configure gateways. A maximum of 10 gateways can be configured. When both the Destination and Subnet fields are both 0.0.0.0 (displayed as blank space), the gateway is a default gateway.

Figure 9: IP Gateways Form

Destination

Synopsis: ###.###.###.### where ### ranges from 0 to 255

Default: 0.0.0.0

Specifies the IP address of the destination device. An IP address is a 32-bit number that is notated by using four numbers from 0 through 255, separated by periods.

Subnet

Synopsis: ###.###.###.### where ### ranges from 0 to 255

Default: 0.0.0.0

Specifies the IP subnet mask of the destination. An IP subnet mask is a 32-bit number that is notated by using four numbers from 0 through 255, separated by periods. Typically, subnet mask numbers use either 0 or 255 as values (e.g. 255.255.255.0) but other numbers can appear.

Gateway

Synopsis: ###.###.###.### where ### ranges from 0 to 255

Default: 0.0.0.0

Specifies the gateway IP address. The gateway address must be on the same IP subnet as this device.

Note: The default gateway configuration will not be changed when resetting all configuration parameters to defaults.

ROS™ v3.5 28 RS400