RuggedCom RS400 manual Synopsis 3 to Default 10 ms, Dyn Pack Char, Dyn Pack Timer

Serial Protocols

Port

Synopsis: 1 to 4

Default: 1

The port number as seen on the front plate silkscreen of the switch.

Pack Char

Synopsis: 0 to 255 or { Off }

Default: Off

The character that can be used to force forwarding of accumulated data to the network. If a packetization character is not configured, accumulated data will be forwarded based upon the packetization timeout parameter.

Pack Timer

Synopsis: 3 to 1000

Default: 10 ms

The delay from the last received character until when data is forwarded.

Flow Control

Synopsis: { None, XON/XOFF }

Default: None

Whether to use XON-XOFF flowcontrol on the port.

Loc Port

Synopsis: 1024 to 65535

Default: 62001

The local IP port to use when listening for an incoming connection or UDP data.

Rem Port

Synopsis: 1 to 65535

Default: 62000

The remote TCP port to use when placing an outgoing connection.

IP Address

Synopsis: ###.###.###.### where ### ranges from 0 to 255 or { <EMTY STRING> } Default:

The permanent master's IP address. Empty string represents management IP address of this device.

Link Stats

Synopsis: { Disabled, Enabled }

Default: Enabled

Enables links statistics collection for protocol.

Dyn Pack Char

Synopsis: 0 to 255 or { Off }

Default: Off

The character that can be used to force forwarding of accumulated data to the network for connection to dynamic master. If a packetization character is not configured, accumulated data will be forwarded based upon the packetization timeout parameter.

Dyn Pack Timer

Synopsis: 3 to 1000

Default: 10 ms

The delay from the last received character until when data is forwarded to the dynamic master.

ROS™ v3.5 74 RS400