RuggedCom RS400 manual Call Dir, Max Conns, Loc Port, Rem Port, Link Stats

Serial Protocols

Default: TCP

The network transport used to transport protocol data over IP network.

Call Dir

Synopsis: { In, Out, Both }

Default: In

Whether to accept an incoming connection, to place an outgoing connection, or to place outgoing connection and wait for incoming (both directions). This parameter is applicable only for TCP transport.

Max Conns

Synopsis: 1 to 64

Default: 1

The maximum number of allowed incoming TCP connections.

Loc Port

Synopsis: 1024 to 65535

Default: 50000

The local IP port to use when listening for an incoming connection or UDP data.

Rem Port

Synopsis: 1 to 65535

Default: 50000

The remote TCP port to use when placing an outgoing connection.

IP Address

Synopsis: ###.###.###.### where ### ranges from 0 to 255 or { }

Default:

For direction 'OUT' (client), remote IP address to use when placing an outgoing TCP connection request.

For direction 'IN' (server), local interface IP address to listen to the local port for connection request. Emtpy string can be used for IP address of management interface.

For direction 'BOTH' (client or server), remote IP address to use when placing an outgoing TCP connection requestListening interface will be chosen by matching mask.

Link Stats

Synopsis: { Disabled, Enabled }

Default: Enabled

Enables links statistics collection for protocol.

ROS™ v3.5 72 RS400