RuggedCom RS400 manual Default UTC-000 Lisbon, London, NTP Server Address, NTP Update Period

Administration

UTC+5:30 (Calcutta, New Delhi), UTC+5:45 (Kathmandu), UTC+6:00 (Almaty, Dhaka), UTC+6:30 (Rangoon), UTC+7:00 (Bangkok, Hanoi), UTC+8:00 (Beijing, Hong Kong) UTC+9:00 (Seoul, Tokyo), UTC+9:30 (Adelaide, Darwin),

UTC+10:00 (Melbourne, Sydney), UTC+11:00 (Magadan, New Caledonia), UTC+12:00 (Auckland, Fiji) }

Default: UTC-0:00 (Lisbon, London)

This setting allows for the conversion of UTC (Universal Coordinated Time) to local time.

NTP Server Address

Synopsis: ###.###.###.### where ### ranges from 0 to 255

Default:

This parameter specifies the IP address of an (S)NTP server ((Simple) Network Time Protocol); programming an address of '0.0.0.0' disables SNTP requests. This device is an SNTP client which allows for only one server. If an server address is programmed then a manual setting of the time will be overwritten at the next update period.

NTP Update Period

Synopsis: 1 to 1440

Default: 60 min

This setting determines how frequently the (S)NTP server is polled for a time update. If the server cannot be reached, three attempts are made at one minute intervals and then an alarm is generated at which point the programmed rate is resumed.

RS400 35 ROS™ v3.5