RuggedCom RS400 Serial Protocols TIN Mode, TIN Transport, WIN Transport, TIN IP Port, WIN IP Port

Serial Protocols

TIN Mode:

Synopsis: 1 to 2

Default: 1

TIN Protocol running mode.

TIN Transport:

Synopsis: { TCP, UDP }

Default: UDP

The network transport used to transport protocol data over IP network.

WIN Transport:

Synopsis: { TCP, UDP }

Default: UDP

The network transport used to transport protocol data over IP network.

TIN IP Port

Synopsis: 1024 to 65535

Default: 51000

The local port number on which TIN protocol listens for TCP connections or UDP datagrams.

WIN IP Port

Synopsis: 1024 to 65535

Default: 52000

The local port number on which WIN protocol listens for TCP connections or UDP datagrams.

Message Aging Timer

Synopsis: 1 to 3600 or { Disabled }

Default: Disabled

This timing parameter (in seconds) is used to configure the removal of duplicate messages in TIN mode2. If the same message is received within the time interval specified by this parameter, the new message is considered duplicate, and is thus discarded.

Address Aging Timer

Synopsis: 60 to 1000

Default: 300 s

The time of communication inactivity after which a learned TIN address is removed from the device address table. Entries in Link Statistics Table with the aged address will be kept until statistics are cleared.

Broadcast Addresses

Synopsis: { Static, Dynamic, StaticAndDynamic }

Default: Static

A The device address table in which addresses will be found for broadcast messages.

Unicast Addresses

Synopsis: { Static, Dynamic, StaticAndDynamic }

Default: Dynamic

A The device address table in which addresses will be found for unicast messages.

Link Stats

Synopsis: { Disabled, Enabled }

Default: Enabled

Enables links statistics collection for protocol.

ROS™ v3.5 78 RS400