Runco 1. LS-HB Specifications continued, Lamp Video Processing Calibration, Performance

Specifications

Table 7-1. LS-HB Specifications (continued)

Microdisplay:

Native Resolution:

Aspect Ratios:

Throw Ratios:

Vertical Lens Shift Range (Ceiling Mount):

Light Output (SatCo = High):

Sequential Contrast (SatCo = High):

Cooling Performance:

Projection Modes:

Lamp:

Video Processing:

Calibration:

Performance

Texas Instruments DLP® 1080p DMD

Full HD, 1920 x 1080 (2,073,600 pixels)

Native (Pixel-to-Pixel), 16:9, Letterbox, 4:3, 4:3 Narrow, Letterbox (Anamorphic lens compatible)

Refer to Table 3-3

Down = 25% to 60% of screen height below lens center (50% to 120% of one half of the screen height)

2,700 ANSI lumens (average) calibrated at D65

1,800:1 typical

High efficiency adaptive voltage side-to-side cooling with low system acoustic noise level and low light pollution cabinet

Front, Rear, Ceiling (front/rear)

User replaceable 230W HPM; 2,000 hour lifetime (typical)

Runco advanced ViVix processing with 10 bit independent dual channel image processing, true 1080i deinterlacing, MPEG artifact reduction (block and mosquito noise), latest motion adaptive processing, 3D noise reduction, detail enhancement, rich color processing and noise reduction, less than one frame latency

Full RGB gain/offset control (White Balance), Gamma, Contrast, Brightness

88 Runco LS-HB Installation/Operation Manual