LS-HB Rear Panel, Rgb | Runco manual

Controls and Functions

Figure 2-3shows the LS-HB rear panel.					2.2
										LS-HB Rear Panel
9	8	7	6	5	4

1	2						3
1	2						3

Figure 2-3. LS-HB Rear Panel

1.HDMI 1 (Digital) HDMI 2 (Digital)

HDCP-compliant digital video inputs for connecting an HDMI or DVI source.

2.RGB

Provides a standard, 15-pin VGA-style connection to either an RGB or component high-definition source, or to a personal computer. The LS-HB automatically detects the input signal resolution.

3.POWER INPUT (100 to 240 VAC) Connect the LS-HB to power here.

4.COMPONENT 1/SCART (RCA connectors)

Standard- or high-definition (480i/480p/576i/576p/720p/1080i/1080p) Component (YPrPb) input for connecting a DVD/HD-DVD/BD player, HD set-top box or other SD/HD source. Also provides RGB input for RGBS sources.

For best results, do not run your DVD player in progressive mode.

Tip

5.VIDEO

Standard composite video input for connecting a VCR, laser disc player or other composite video source. Also provides composite sync input for RGBS sources.

6.S-VIDEO

A standard S-Video input for connecting a DVD player, satellite receiver or Super VHS (S-VHS) VCR.

Runco LS-HB Installation/Operation Manual

9

Image 25

Runco operation manual LS-HB Rear Panel, Rgb

Contents

LS-HB Page RuncoCare Standard Features RuncoCare Standard Two Year Limited Warranty RuncoCare Claim Procedure Extended Service Options Copyright and Trademarks Important Safety Instructions Declaration of Conformity Compliance Information FCC Part Page Table of Contents Operation Specifications Maintenance and TroubleshootingSerial Communications Table of Contents Xiv List of Figures List of Figures About This Manual Introduction If you need Turn to Using This Manual Description, Features and Benefits Optional Accessories LS-HB at a Glance Controls and Functions Cursor Keys Source LS-HB Rear/Bottom/Top View Runco Logo Badge RGB LS-HB Rear Panel Trigger 1 3.5-mm, mini phono jack LS-HB Remote ControlRS-232 OFF Picture Adjustment Buttons Contrast Memory Preset Buttons M1 / M2 / M3Sharpness Sharp Press to adjust sharpness Gamma Gamma Aspect Ratio Selection Button Controls and Functions Remote Control InstallationOperation IR Reception Angles Step Procedure Quick SetupFor Details, Refer Installation Type InstallationConsiderations Throw Distance Ambient LightEstimating Throw Distance Position Vertical and HorizontalPrimary Lens Screen Lens Only Anamorphic Minimum Maximum Floor Installation Ceiling InstallationLens Shift Folded Optics Installing the Movable Installing the Optional Anamorphic Lens MountTransport Assembly Anamorphic Lens Attaching the Transport Assembly Attachment Plate Ceiling Mount Plate Attachment Plate Projector bottom Do not OVER-TIGHTEN the Screws Plate Installation Plate Anamorphic Lens BaseDo not use the mounting screws provided with the ceiling Mounting the LS-HB Angle Adjusting the Projection Connections to the LS-HB Connector Panel Access Components to the LS-HB Connecting SourceHDMI/DVI Connections See Figure Computer RGB Camcorder RGB Connections Gaming Console 10. Scart Rgbs Connection DTV-Set-Top Box 11. Component Video Connections Camcorder 12. Composite and S-Video Connections Connection RS-232 Controller Trigger Output to External Connecting 12-VoltTheater Equipment Connecting to AC Power Connecting an External IRReceiver Is appropriate to your locale Zoom Out Focus Zoom Turning on the Power Primary Lens Adjustments Rear Projection Ceiling Mode Changing the OSD Language Adjusting the Picture Orientation It is extremely important that the primary lens is properly Installing and Adjusting the Anamorphic Lens Adjusting the Lens Height and Angle Correct Lens Angle Incorrect Lens Angle Tighten the knobs Installation Selecting Video Memory OperationSelecting an Aspect Ratio Selecting An Input Source PIP Input Source Using Picture-In-Picture PIP Using the On-Screen Menus LS-HB Main Menu 169 Aspect Ratio Settings Narrow 169 Native You must enter a passcode to access the Save ISF Typical Pluge Pattern for Adjusting Brightness Typical Test Pattern for Adjusting Sharpness Operation Overscan Examples Source Select Sub-Menu LS-HB Advanced Menu Same frame rate as the main source RGB Adjust Sub-Menu 10. Fine Sync Sub-Menu 11. LS-HB System Menu 12. Source Enable Sub-Menu PBP1 PBP2 14. PIP Split-Screen Mode Operation Language 15. LS-HB Service Menu OSD menus are not available when in test pattern mode Operation Lamp Replacement Maintenance and Troubleshooting Symptom Possible Causes Solution Troubleshooting Tips LS-HB Maintenance and Troubleshooting Serial Communications Key Commands RS232 Remote Button IR Code Description Keyname Set Serial Command Key Names and IR Codes Gam.crt Lit.tog Operations Control Commands Function Action on unit Operation Commands Values Serial Commands Save.isf Resync Execute Color.space = ? Trans.menu = ? Soft.version Error Code LED Indication Description RS-232 Error Codes Fan 1 failed Serial Communications LS-HB Specifications Specifications LS-HB Specifications Weight without lens DimensionsOperating Temperature Universal Power Supply LS-HB Dimensions LS-HB Dimensions Component Supported TimingsComposite KHz PAL-B/G Page 020-1093-00 Rev. a November