Runco LS-HB operation manual Connecting an External IR, 15. External IR Receiver Connection

Installation

If infrared signals from the remote control cannot reach the projector due to excessive	Connecting an External IR
distance or obstructions such as walls or cabinet doors, you can connect an external IR	Receiver
repeater system to the IR INPUT on the LS-HB to extend the range of the remote control.
See Figure 3-15.

l

1 4

IR Sensor

IR Repeater

▲

▼

M2

▲

M1

Remote Control

(3.5-mm, mini

phono plug)

Figure 3-15. External IR Receiver Connection
Projector: The LS-HB ships with various types of AC power cords. Choose the one that	Connecting to AC Power
is appropriate to your locale.

Plug the female end of the power cord into the AC receptacle on the rear of the projector (AC 100V ~ 240V); see Figure 2-3.Then, connect the other end to your AC power source.

Anamorphic Lens Transport: An AC-to-DC power adapter is provided for the lens transport. Connect the power adapter to the +9V DC In jack on the rear of the lens transport assembly. Connect the other end to an AC power source.

Runco LS-HB Installation/Operation Manual 37