Runco LS-HB operation manual Changing the OSD Language 3.10 Adjusting the Picture Orientation

Installation

When you turn on the LS-HB for the first time, the OSD Language Menu appears.

The LS-HB can display the menus in English, French, German, Italian, Spanish, Swedish, Traditional Chinese, Simplified Chinese, Japanese, Korean, Portuguese or Russian.

Press or to select a language. Then, press ENTER to confirm your selection.

If the LS-HB is installed behind the screen, you must change the picture orientation to match the installation method. To do this, press MENU on the remote control. Then, select System from the Main Menu.

If the projector is used in a rear-projection application (see Figure 3-5), press repeatedly to select Rear Projection from the System Menu. Press or to set it to On.

If the projector is ceiling-mounted, the LS-HB automatically inverts the image. If this automatic inversion is not desired, select Ceiling Mode from the System Menu and set it to Off.

3.9

Changing the OSD Language

3.10

Adjusting the Picture Orientation

Rear Projection

Ceiling Mode

Runco LS-HB Installation/Operation Manual 39