Runco LS-HB operation manual 2. Aspect Ratio Settings

Operation

Aspect Ratio: To change the aspect ratio (size and shape) of the projected image, press or to highlight Aspect Ratio. Use the or buttons to select the appropriate

aspect ratio for your screen size, installed lens configuration and the type of program material being viewed, then press ENTER; refer to Table 4-2.

Table 4-2. Aspect Ratio Settings

Aspect		Aspect		Geometry of Projected Image
		Ratio of
Ratio	Description		With Standard Lens
		Source			With Anamorphic Lens (2.35:1 Screen)
Setting
		Signal	(1.78:1 Screen)

16:9

	16:9 linearly scales the
16:9	source active image
	horizontally and vertically
	to fill a 16:9 screen.

4:3

16:9

	4:3 linearly scales the
4:3	source active image
	horizontally and vertically
	to fill a 4:3 screen.

4:3

Runco LS-HB Installation/Operation Manual 49