Sam4s ER-390M manual Program 150 PLU Group Assignment

Program 150 – PLU Group Assignment

Each PLU may report to any three of 20 groups. Group totals appear on reports, so that you can track sales of different types of items. A group can also be used to designate items that are to print on an optional kitchen printer.

Note: The PLU will report to group “0”, if not programmed to report to groups 1-20.

1.Turn the control lock to the P position.

2.To begin the program, enter 1 5 0, press the SBTL key.

1 5 0 SBTL

3.Select the PLU or PLUs you wish to program in one of the following ways:

• Press a PLU key on the keyboard, or

PLU

•Press the first PLU keys that are to receive the same status and Press the last PLU keys, or

PLU PLU

•Enter up to 14 digit number of the PLU and press the PLU key, or

Enter the PLU#,	PLU
up to 15 digits

•Enter the number of the first PLU in a range of PLUs that are to receive the same setting; press the PLU key. Enter the last number in the range; press the PLU key.

Enter the PLU#,	PLU	Enter the PLU#,	PLU
up to 15 digits		up to 15 digits

4.Enter up to three 2-digit numbers representing the groups where you wish to add the PLUs sales, i.e. enter 1 0 for group 10 or enter 0 4 for group four. Press the X/TIME key.

X/TIME

1st Group 2nd Group 3rd Group

5.To program additional PLUs, repeat from step 3, or press the CASH key to finalize the program.

CASH

ER-390M Program Mode Programming • 93