Sam4s ER-390M manual RS-232 Communication Options, Option Value

RS-232 Communication Options

You must define the device that is attached to the RS-232C communications port, and the options for the device.

1. Enter 8 0 and press the SBTL key to Program Port 1 OR Enter 8 1 and press the SBTL key to Program Port 2.

2.Refer to the chart RS-232C option chart that follows and enter the number of the address you wish to program and press the X/TIME key.

3.Enter the value that represents your selection and press the CASH key.

4.Repeat from step 2 for any additional options you wish to program.

5.Press CASH to exit the program

PORT 1

Repeat for another

Index

	8	0	SBTL	N1	XTIME	N2	CASH	CASH
				PORT 2
				Repeat for another
				Index
	8	1	SBTL	N1	XTIME	N2	CASH	CASH
N1	OPTION				N2		VALUE
1	Baud Rate				0		9600 BPS
					1		1200 BPS
					2		2400 BPS
					3		4800 BPS
					4		19200 BPS
2	Parity				0		NONE
					1		ODD
					2		EVEN
3	Data Bits				0		8 BITS
					1		7 BITS
4	Stop Bits				0		1 BIT
					1		2 BIT
82 • Service Mode Programming								ER-390M