Sam4s ER-390M manual Clerk Sign-On/Sign-Off, Direct Sign-On, Coded Sign-On

Clerk Sign-On/Sign-Off

See "System Option Programming” to review your clerk options:

•System option #2 allows you to select direct or code entry sign on and/or stay- down or pop-up operation.

Depending on how your machine has been programmed, sign-on will take place only at the beginning of a shift (stay-down), or may have to be repeated for each transaction (pop-up). If your machine has been programmed for stay-down clerks, the clerk currently signed on must be signed off before another clerk may be signed on.

Check with your store manager to see which options have been selected for your register.

Before any transaction may take place, a clerk must be signed on. Clerk sign-on is accomplished in one of two ways:

Direct Sign-On

To sign on a clerk, enter the clerk number and press the clerk key.

CLERK

Clerk # (1-15)

To sign the clerk off, enter 0 (Zero) and press the clerk key.

0 CLERK

Coded Sign-On

To sign on a clerk, press the clerk key, enter the clerk code, and then press the clerk key again.

CLERK CLERK

Clerk Code (up to 6 digits)

To sign the clerk off, enter 0 (Zero) and press the clerk key.

0 CLERK

ER-390M Operating Instructions • 19