Sam4s ER-390M manual Table Management and Clerk Interrupt Operations, Overview

Table Management and Clerk Interrupt Operations

Overview

The ER-390Mcan employ a manual previous balance, hard check, or soft check system. (You must select hard or soft check posting in memory allocation programming - the default selection is soft.)

There are two methods in ER-390Mto manage check track. One is table management system and the other is clerk interrupt system. If you want to use clerk interrupt system.

First, Program as below.

To Enter Clerk Interrupt System (To Exit Table Management system)

1.Program Clerk Secret Code

2.Set system option #2 to a value of 1. See "System Option Programming" 3.Set system option #26 to a value of 1. See "System Option Programming“.

To Exit Clerk Interrupt System (To Enter Table Management system)

♦Set system option #26 to a value of 0. See "System Option Programming“.

54 • Operating Instructions ER-390M