Sam4s ER-390M manual Programming the Clerk Report Message

Programming the Clerk Report Message

The Clerk Report selection allows you to reprogram the descriptors that appear with the Clerk Report totals and counters. For example, the first total on the clerk report "NET SALES" might be re-labeled to say "GROSS SALES". You can reprogram any of the Financial Report totals listed here with any 18-character descriptor. (See “Clerk Report Message”).

1.Turn the control lock to the P position.

2.To begin the program, enter 7 1 0, press the SBTL key.

7 1 0 SBTL

3.Refer to the chart below and enter the number that represents the line you wish to program; press the X/TIME key.

XX/TIME

4.If you are programming

Enter up to 18

three-character SBTL codes

5.Press the CASH key to finalize the program.

CASH

158 • Program Mode Programming ER-390M