Function Key Assignment Programming

Function keys may be relocated, inactivated or changed with this program. For example, you may wish to place functions, such as PREVIOUS BALANCE and SERVICE that are not placed on the default keyboard. Or perhaps, you may wish to remove a function, such as CANCEL, for security reasons.

Please note the following limitations:

If you assign a duplicate of a function code, the duplicate will function exactly as the original - you will not get separate totals and counters on reports for the duplicated key.

You can reassign keys only in locations that are programmable. See "Keyboards“, where the key locations that may be programmed are identified.

To Assign a Function Key to a Location:

1.Turn the control lock to the S position.

2.Enter 70, and then press the SBTL key.

7 0 SBTL

3.Refer to Function Key Codes to find the code for the key you wish to assign, press the location you wish to program. Repeat this step to assign another key.

Key

Location

Key Code

4. Press CASH key to finalize key assignment program.

CASH

80 Service Mode Programming

ER-390M

Page 88
Image 88
Sam4s ER-390M manual Function Key Assignment Programming, To Assign a Function Key to a Location