Connecting to a Power Source
■Charging LED of the
Status | Using the cradle | Direct to the camera |
|
|
|
Being Charged | Red LED is on | Red LED is on |
|
|
|
Charging is complete | Green LED is on | Green LED is on |
|
|
|
Charging error | Red LED is off or blinking | Red LED is off or blinking |
|
|
|
●If there is a charging error, please check all the power connections are in place.
●A USB cable for transmitting data can’t be used for charging the rechargeable battery.
●A USB cable for recharging the battery is optional.
-When the USB cable is inserted into the connection terminal of the camera, you can charge the battery and tramsmit data at the same time.
-When the USB cable is inserted into the DC connection terminal of the cradle, you can charge the battery. When the USB cable is inserted into the USB port of the cradle, you can transmit data.
■Charging time (When the camera is turned off)
- Using the cradle | : About 150MIN |
- Using the | : About 150MIN |
- Using the USB cable: About 150MIN
INFORMATION
Important information about the rechargeable battery.
●If you charge the battery with the camera power on, the battery can't charge fully. To charge the battery fully, turn the camera off when you charge it.
●If you insert the fully discharged battery to charge it, do not turn on the camera at the same time. The camera may not be turned on because of the low battery capacity. Charge the battery for over 10 minutes to use the camera.
●Do not use the flash frequently or take a movie clip with the fully discharged battery charged for a short time. Even if the charger is inserted, the camera power may be turned off because the rechargeable battery is discharged again.
《16》
