+/- button

Using the Custom White Balance

White balance settings may vary slightly depending on the shooting environment.

You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance.

1.Select the CUSTOM ( ) menu of the White Balance.

2.Place a sheet of white paper in front of the camera so that the LCD monitor shows only white, and then press the SHUTTER button.

3.Your custom white balance value is stored.

-The custom white balance value will be applied, starting with the next picture you take.

-The user configured white balance will be remain effective until it is overwritten.

Measure:Shutter

[ White paper ]

Exposure compensation : This camera automatically adjusts the exposure according to the ambient lighting conditions.

You can also select the exposure value by using the +/- button.

Compensating Exposure

1. Press the +/- button, and then use the UP and DOWN buttons to select the exposure compensation icon

( ). The exposure compensation menu bar will appear as shown.

2. Use the LEFT and RIGHT buttons to set the desired exposure compensation factor.

3.Press the +/- button again. The value you set will be saved and the Exposure Compensation setup mode will close.

If you change the exposure value, the exposure indicator ( ) will be displayed on the bottom of the LCD monitor.

A negative exposure compensation value reduces the exposure.

Note that a positive exposure compensation value increases the exposure and the LCD monitor will appear white or you may not get good pictures.

44

Page 44
Image 44
Samsung EC-I50ZZSBA/AS, EC-I50ZZBBA/FR, EC-I50ZZRBA/FR, EC-I50ZZSBA/GB, EC-I50ZZRBA/DE, EC-I50ZZBBB/DE, EC-I50ZZSBA/US 《44》