INSTRUCTION SET S3F80P5_UM_ REV1.00
ADC — Add with Carry
ADC dst,src
Operation: dst ← dst + src + c
The source operand, along with the setting of the carry flag, is added to the destination operand
and the sum is stored in the destination. The contents of the source are unaffected. Two's-
complement addition is performed. In multiple precision arithmetic, this instruction permits the
carry from the addition of low-order operands to be carried into the addition of high-order
operands.
Flags: C: Set if there is a carry from the most significant bit of the result; cleared otherwise.
Z: Set if the result is "0"; cleared otherwise.
S: Set if the result is negative; cleared otherwise.
V: Set if arithmetic overflow occurs, that is, if both operands are of the same sign and the result
is of the opposite sign; cleared otherwise.
D: Always cleared to "0".
H: Set if there is a carry from the most significant bit of the low-order four bits of the result;
cleared otherwise.
Format:
Bytes Cycles Opcode
(Hex) Addr Mode
dst src
opc dst | src 2 4 12 r r
6 13 r lr
opc src dst 3 6 14 R R
6 15 R IR
opc dst src 3 6 16 R IM
Examples: Given: R1 = 10H, R2 = 03H, C flag = "1", register 01H = 20H, register 02H = 03H, and
register 03H = 0AH:
ADC R1,R2 → R1 = 14H, R2 = 03H
ADC R1,@R2 → R1 = 1BH, R2 = 03H
ADC 01H,02H → Register 01H = 24H, register 02H = 03H
ADC 01H,@02H → Register 01H = 2BH, register 02H = 03H
ADC 01H,#11H → Register 01H = 32H
In the first example, destination register R1 contains the value 10H, the carry flag is set to "1",
and the source working register R2 contains the value 03H. The statement "ADC R1,R2" adds
03H and the carry flag value ("1") to the destination value 10H, leaving 14H in register R1.
6-14