ELECTRICAL DATA S3F80P5_UM_ REV1.00
Table 16-2. D.C. Electrical Characteristics (Continued)
(TA = -25 °C to + 85 °C, VDD = 1.60 V to 3.6 V)
Parameter Symbol Conditions Min Typ Max Unit
IDD1 Operating Mode (note2)
VDD = 3.6 V
8 MHz crystal
− 3
6
mA
IDD2 Idle Mode
VDD =3.6 V
8 MHz crystal
−
1
2
IDD3 Stop Mode
LVD OFF, VDD = 3.6 V
−
0.7 5 uA
IDD12 Operating Mode
VDD = 3.6 V
4 MHz crystal
−
1.5
3
mA
Supply Current
(note1)
IDD22 Idle Mode
VDD =3.6 V
4 MHz crystal
−
0.5
1
NOTES:
1. Supply current does not include current drawn through internal pull-up resistors or external output current loads.
2. IDD1 includes flash operating current (flash erase/write/read operation).
3. The adder by LVD on current in back-up mode is 18uA.
Conditions Min Typ Max Unit
LVD on current in back-up mode VDD = 1.60V − 18 35 uA
Note) Back-up mode voltage is VDD between LVD and POR.
Table 16-3. Characteristics of Low Voltage Detect Circuit
(TA = -25 °C to + 85 °C)
Parameter Symbol Conditions Min Typ Max Unit
Hysteresis Voltage of LVD
(Slew Rate of LVD) ΔV − – 100 200 mV
Low Level Detect Voltage
for Back-Up Mode LVD − 1.60 1.65 1.70 V
LVD_FLAG1 − 1.78 1.88 1.98 V
LVD_FLAG2 − 1.88 1.98 2.06 V
LVD_FLAG3 − 2.43 2.53 2.63 V
Low Level Detect Voltage
for Flag Indicator
LVD_FLAG4 − 2.63 2.73 2.83 V
16-4